Philips 42PFL6609/93, 47PFL6609/93 user manual EasyLink buttons, Enable or disable EasyLink

EasyLink buttons

You can control EasyLink-compliant devices with the following buttons on the remote control of your TV.

Button		EasyLink function
	(Play/	Starts, pauses or resumes
Pause)		playback on your EasyLink
		device.
	(Stop)	Stops playback on your EasyLink
		device.
	(Record)	Starts or stops video recording
		on your EasyLink device.
	(Fast	Searches backward.
Backward)
	(Fast	Searches forward.
Forward)
0-9		When EasyLink is enabled,
(Numeric		selects a title, chapter or track.
buttons)
		Navigates through the menus of
		the EasyLink-compliant device.
		Activates a selection or accesses
		the menu of the EasyLink-
		compliant device.
( )		Displays the menus of the
		EasyLink-compliant device. Note
		that when (Home) is pressed,
		the TV menu is displayed.
	(Standby-	When EasyLink is enabled,
On)		switches the TV and all EasyLink
		devices to standby. Note that
		you must press and hold
		(Standby-On) for at least 3
		seconds for this to occur.

Tip

•Press to switch back to the antenna source from EasyLink mode.

Enable or disable EasyLink

Note

•Do not enable Philips EasyLink if you do not intend to use it.

1Press (Home).

2Select [Installation] > [Preferences] > [EasyLink].

3Select [ON] or [OFF].

Enable or disable remote control key forwarding

1Press (Home).

2Press to select a device.

3Press ().

4Select [En./Dis. RC pass.].

5Press .

6Press or to highlight an HDMI connector.

7Press to enable RC key forwarding for the selected HDMI connector.

SetTV speakers to EasyLink mode

When enabled, this feature automatically turns off TV speakers when content from an EasyLink-compliant home theater system is played. Audio is played only from the home theater system’s speakers.

1Press (Home).

2Press to select [Setup] > [Sound]. » The [Sound] menu appears.

3Select [TV speakers].

» The [TV speakers] menu appears.

4Select [Automatic (EasyLink)].

» TV speakers are set to EasyLink mode.

24EN