Philips 42PFL5604/77 ChangeTV preferences, Start aTV demo, Reset theTV to factory settings

Update software (analog broadcasts)

Before performing this procedure be sure to:

•Set aside some time to complete the entire update.

•Have available a USB storage device with at least 64MB of storage space.

•Have access to a computer with a USB port and internet access.

1Press (Home).

2Select [Setup] > [Software update] > [Update assistant].

3Select [Start].

4Connect the USB storage device to your computer.

5Follow the on-screen instructions to complete the update.

ChangeTV preferences

The [Preferences] menu allows you to customize various features and functions.

1Press (Home).

2Select [Setup] > [Installation] > [Preferences].

•[Location] : Optimizes TV settings for your location - home or shop.

•[Volume bar] : Displays the volume bar when adjusting the volume.

•[EasyLink] : Enables one-touch play and one-touch standby between EasyLink-compliant devices.

•[Pixel Plus Link] : Overrides the settings of connected devices and uses the settings of the TV.

•[E-sticker] : For shop mode only. Sets the location of the e-sticker.

18EN

Downloaded From TV-Manual.com Manuals

Start aTV demo

You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. When a demo is available, it is displayed in the menu list.

SUBTITLE INCR.SURR SOURCE

TV

DEMO SCENEA CC SAP

1Press DEMO on the remote control.

2Press to select a demo and press OK to view it.

3Press DEMO to exit.

Reset theTV to factory settings

You can restore the default picture and sound settings of yourTV. Channel installation settings remain the same.

1Press (Home).

2Select [Setup] > [Installation] > [Factory settings].

3Press OK or to enter the [Factory

settings] menu.

» [Reset] is highlighted.

4Press OK to reset to factory settings.

5Press (Home) to exit.