Philips 32PFL5604/78 Add devices, Use Philips EasyLink, EasyLink features, One-touch play

Add devices

After connecting devices, assign the device attached to each connector.This allows you to easily identify devices connected to yourTV.

1Press (Home).

2Select [Add new device] and press OK.

3Select [Start] and press OK.

4Press or to select a device and press

.

5Press or to select the conector your device is connected to and press .

6If available, press or to select the audio connector your device is connected to and press .

7Switch on your device and check for video and audio output.

8If there is video and audio output, press OK.

Repeat the procedure until all devices are correctly assigned to connectors.

Use Philips EasyLink

Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.

Note

•Philips does not guarantee 100% interoperability with all HDMI CEC devices.

Note

•The EasyLink-compliant device must be switched on and selected as the source.

Downloaded From TV-Manual.com Manuals

EasyLink features

One-touch play	English
When you connect your TV to devices that
support one-touch play, you can control your
TV and the devices with one remote control.
For example, when you press Play on your
DVD remote control, your TV automatically
switches to the correct channel to show the
DVD content.
One-touch standby
When you connect your TV to devices that
support standby, you can use your TV remote
control to put your TV and all connected
HDMI devices in standby mode.
System audio control
When you connect your TV to HDMI
CEC compliant devices, your TV can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your TV.
You can use the remote control from the
connected device to adjust the volume.
Remote control (RC) key forwarding
RC key forwarding allows you to control
EasyLink-compliant devices using your TV
remote control.
Pixel Plus Link
Pixel Plus Link overrides the settings of
connected devices and uses the settings of the
TV.

EN 23