Automatic Channel Set-up

Manual Channel Set-up

Channel set-up involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter.

Display the menu by pressing the Menu button. Press the left or right direction button to select the Channel icon and press the up or down direction or OK button to display the Channel menu.

Channel

Auto Tuning

Intelligent Tuning
Manual Tuning
Fine-Tune	42.25MHZ
Sound System	DK
Channel Edit

1.Press the up or down direction button to select the Auto Tuning option.

2.Press the right direction or OK button to start channel search.

Note: Depending on the number of channels you receive, it may take several minutes for the channel search to finish. If you want to interrupt the process, press the Menu button. The channels already found will be stored.

Always start tunning from channel number 1.

Follow the below procedure if you find that some channels have not been stored after the automatic set-up as well as the intelligent set-up.

	Manual Tuning
Channel	1
Band	VHFL
Frequency	49.70 MHz
Search

1.Activate the Channel menu and press the up or down direction button to select the Manual Tuning option.

2.Press the right direction or OK button to enter the Manual Tuning menu.

3.Select the Current Channel option and press the left or right direction button to select a channel number to store the channel that will be found.

4.If necessary, press the up or down direction button to select the Band option and press the left or right direction button to toggle among VHFH, UHF and VHFL.

5.Press the up or down direction button to select the Frequency option and press the left or right direction button to search manually.

6.Press Menu to return or Exit to close the menu.

3.Channels are arranged in a pre-set order. Refer to the following sections if you want to fine tune or skip a channel, or swap two channels.

Intelligent Channel Set-up

This operation will keep all the existed channels and add newly found channels to the end of the channel list.

1.Activate the Channel menu and press the up or down direction button to select the Intelligent Tuning option.

2.Press the right direction or OK button to start inteligent tuning.

Note: If you want to interrupt the process, press the Menu button. The channels already found will be stored.

Fine Tuning a Channel

If the picture is not clear you can fine tune the channel.

1.Activate the Channel menu and press the up or down direction button to select the Fine-Tune option.

2.Press the left or right direction button for fine tuning

3.Press Menu to return or Exit to close the menu.

Setting the Sound System

1.Activate the Channel menu and press the up or down direction button to select the Sound System option.

2.Press the right direction or OK button to display the selectable options..

3.Press the up or down direction button to select an appropriate sound system: DK, BG, I and M.

4.Press Menu to return or Exit to close the menu.

Note:Sound system for india:BG.

EN 9