Channel Edit
You can use this function to skip a channel or swap two channels.
1.Activate the Channel menu and press the up or down direction button to select the Channel Edit option.
2.Press the right direction or OK button to enter the Channel Edit menu.
Channel Edit
Current Channel | 1 |
Target Channel. | 1 |
Skip | Yes |
Swap | ? |
Skipping a Channel
If a channel was stored twice or its reception is poor, you can simply skip it. The skipped channels can not be selected by pressing the CH +/- buttons.
1.Press the up or down direction button to select the Current Channel option and press the left or right
direction button to select the channel number to be skipped.
2.Press the up or down direction button to select the Skip option and press the left or right direction button to select Yes.
3.Press Menu to return or Exit to close the menu.
Swapping Two Channels
1.Press the up or down direction button to select the Current Channel option and press the left or right direction button to select a channel number.
2.Press the up or down direction button to select the Target Channel option and press the left or right direction button to select the channel number to be swapped.
3.Press the up or down direction button to select the SWAP option and press the left, right direction or OK button to SWAP.
5 Use more of your TV
Adjusting the Picture
The menus for adjusting the picture are used to obtain the best picture setting according to your preference, the type of programme you are watching and the ambient lighting.
Display the menu by pressing the Menu button. Press the left or right direction button to select the Picture icon and press the up or down direction or OK button to display the Picture menu. The Picture options are as below:
Picture |
|
BackLight | 80 |
Picture Mode | Standard |
Scale | Full |
Brightness | 50 |
Contrast | 50 |
Saturation | 50 |
Sharpness | 50 |
Tint | 0 |
Color Temperature | Normal |
Natural Light | Off |
Dyanmic Contrast | Off |
Note: Some options may not be available for certain signal sources.
Back Light: this option can be used to adjust the brightness of the backlight, depending on room lighting. Use the left or right direction button to adjust.
Picture Mode: use the right direction or OK button to display the selectable options, then press the up or down direction button to scroll through the picture preset settings: Standard, Bright, Soft or Personal, and press OK to confirm.
Note: When selecting Standard, Bright, Soft, the Back Light will restore to the defaulted setting in factory. You are recommended to use the Bright mode for vivid palette.
Scale: use the right direction or OK button to display
the selectable options, then press the up or down direction button to scroll through the picture size: 4:3, Full, Subtitle, Wide Screen, Original and Nature, (Note: some options may be not selectable for certain signal sources.) and press OK to confirm.
Note: You are recommended to use the full screen mode. Do not use the display mode with black bands on both sides of the picture (such as 4:3) for long
time, otherwise the TV screen may be damaged permanently.
Brightness: adjusts the brightness of the picture.
Contrast: adjusts the difference between the light and dark areas of the picture.
Saturation: adjusts the richness of color.
Sharpness: adjusts the crispness of the edges in the picture.