NEC V322AVT user manual Picture, Adjust, English-20

	Setting		Default
PICTURE
BACKLIGHT		Adjusts the overall image and background brightness. Press + or - to adjust.	70
		Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot be
		changed.
CONTRAST		Adjusts the image brightness in relationship to the input signal. Press + or - to adjust.	50
		Note: When sRGB is selected in picture mode, this function cannot be changed.
SHARPNESS		Adjusts the crispness of the image. Press + or - to adjust.	50*
BRIGHTNESS		Adjusts the image brightness in relationship to the background. Press + or - to adjust.	50
		Note: When sRGB is selected in picture mode, this function cannot be changed.
HUE		Adjusts the hue of the screen. Press + or - to adjust.	50
		Note: When sRGB is selected in picture mode, this function cannot be changed.
COLOR		Adjusts the color depth of the screen. Press + or - to adjust.	50*
		Note: When sRGB is selected in picture mode, this function cannot be changed.
COLOR TEMPERATURE		Adjusts the color temperature of the entire screen. A low color temperature will make the screen	10000K
		reddish. A high color temperature will make the screen bluish. If TEMPERATURE needs further
		adjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/B
		levels, CUSTOM must be showing as the COLOR TEMP selection.
		Note: When sRGB is selected in picture mode, predefi ned 6500k is set so it cannot be changed.
		When PROGRAMMABLE is selected in GAMMA CORRECTION, this function cannot be
		changed.
COLOR CONTROL		Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta.	0
		Note: When sRGB is selected in picture mode, this function cannot be changed.
GAMMA CORRECTION		Select a display gamma for best picture quality.	NATIVE*
		Note: When sRGB is selected in picture mode, this function cannot be changed.	(except sRGB
			setting)
	NATIVE	Gamma correction is handled by the LCD panel.
	2.2	Typical display gamma for use with a PC.
	2.4	Good for video (DVD, etc.)
	S GAMMA	Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the
		image (S-Curve).
	DICOM SIM.	DICOM GSDF curve simulated for LCD type.
	PROGRAMMABLE	A programmable gamma curve can be loaded using NEC optional software.
MOVIE SETTINGS
	NOISE REDUCTION	Adjusts the amount of noise reduction. Press + or - to adjust.	0*
	VIDEO1, VIDEO2, S-VIDEO inputs only
	TELECINE	Automatically senses the sources frame rate for optimal picture quality.	AUTO*
	HDMI, DVD/HD, SCART, VIDEO1,
	VIDEO2, S-VIDEO inputs only
	ADAPTIVE CONTRAST	Sets the level of adjustment for dynamic contrast.	OFF
	HDMI, DVD/HD, SCART, VIDEO1,
	VIDEO2, S-VIDEO inputs only
PICTURE MODE		Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [AMBIENT1] or	STANDARD
		[AMBIENT2]. See page 18.
RESET		Resets the following settings within the PICTURE menu back to factory setting: BACKLIGHT,	-
		CONTRAST, SHARPNESS, BRIGHTNESS, HUE, COLOR, COLOR TEMPERATURE,
		COLOR CONTROL, GAMMA CORRECTION, MOVIE SETTINGS.
ADJUST
AUTO SETUP		Automatically adjusts Screen Size, H position, V position, Clock, Phase and White Level.	-
VGA input only
AUTO ADJUST		H Position, V Position and Phase are adjusted automatically when new timing is detected.	OFF
VGA input only
H POSITION		Controls the horizontal position of the image within the Display area of the LCD.	-
All inputs except DVI, HDMI, DPORT		Press + to move right. Press - to move left.
V POSITION		Controls the vertical position of the image within the Display area of the LCD.	-
All inputs except DVI, HDMI, DPORT		Press + to move up. Press - to move down.
CLOCK		Press + to expand the width of the image on the right of the screen.	-
VGA input only		Press - to narrow the width of the image on the left.
PHASE		Adjusts the visual “noise” on the image.	-
VGA, DVD/HD, SCART inputs only
*: depends on signal input

English-20