Power Indicator
Mode | Status Indicator Light |
|
|
Power ON | Green*1 |
Power OFF | Red |
Power consumption under 0.5 W |
|
Power Save | Amber |
Power consumption under 1 W*2 |
|
Power Standby when “SCHEDULE | Green and Amber blink alternately |
SETTINGS” enabled |
|
Diagnosis (Detecting failure) | Red Blinking |
| (See Troubleshooting page 37) |
*1 If “OFF” is selected in POWER INDICATOR (page 23), the LED will not light when the LCD monitor is in active mode.
*2 Without any option, with factory settings, VGA input only.
Using Power Management
The LCD monitor follows the VESA approved DPM Display Power Management function.
The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fi xed period.
The power management feature on your new display has been set to the “ON” mode. This allows your display to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the display.
NOTE: Depending on the PC and video card used, this function may not operate.
NOTE: It takes about 10 minutes for the monitor to go into power management mode when using DVD/HD, SCART, VIDEO1, VIDEO2 and
Selecting a video source
To view a video source:
Use the input button to set [VIDEO1], [VIDEO2],
Use the COLOR SYSTEM menu to set [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Aspect
DVI, VGA, DPORT
FULL 
1:1 
ZOOM 
NORMAL
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEO
FULL 
WIDE 
DYNAMIC 
1:1 
ZOOM 
NORMAL
Aspect ratio | Unchanged view*3 | Recommended selection | |||||
of image | for picture aspect*3 | ||||||
| |||||||
|
| NORMAL |
|
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
4:3
DYNAMIC
FULL
Squeeze
WIDE
Letterbox
*3 Grey areas indicate unused portions of the screen.
NORMAL: Displays the aspect ratio the same as it is sent from the source.
FULL: Fills entire screen.
WIDE: Expands a 16:9 letter box signal to fi ll entire screen.
DYNAMIC: Expands a 4:3 pictures to fi ll the entire screen with
1:1: Displays the image in a 1 by 1 pixel format.
ZOOM
The image can be expanded beyond the active display area. The image which is outside of active display area is not shown.
ZOOM 
ZOOM
English
