Philips 22HFL5662H, 42HFL5682H Hotel Setting, Hotel and Room Information, Channel Map Setup

6 Hotel Setting

Press M on the Setup Remote Control to display the Hotel Setup Menu.

Hotel and Room Information

Select this option can set the hotel information to customer.

■Hotel Name: Use the virtual keyboard to enter the Hotel Name

■Hotel Phone Number: Use the virtual keyboard to enter the Hotel Phone Number

■Room Number: Use the virtual keyboard to enter the Room Number

Channel Map Setup

Current Channel Setup:

■Channel: Press 0-9 (Number buttons) to enter a program number.

•For cable mode, select a number between 01-250.

•For antenna mode, select a number between 02-250.

■Input: selection of input source. External input can also be assigned to a program number.

■Channel Logo: Press ► to enter a page containing logos, press ▲▼ to select a logo for the channel. Press E button on the set-up remote control to save the logo.

■Digital: Press Yes to select the digital channel.

■RF Channel Number: corresponds to Digital Major Channel:

•Press 0-9 (Number buttons) to enter a channel number between 1 and 999.

■MPEG Program Number: corresponds to Digital Minor Channel.

•Press 0-9 (Number buttons) to enter a channel number between 1 and 32768.

■Rings: This option define which Ring is to be currently used by the TV for Hotel guest viewing. The default is Ring 1, and only those channels marked as valid Ring1 channels are accessible on the TV.

■SmartGuide: This option allows selection of different category option (High Definition, Sports, News, etc).

■Label: This option assigns a (text) channel label to the current TV channel. The channel label will be displayed on the top of the screen during the changing of channels.

■Mute: Mute allows you to customize the video and/or audio muting of the current TV channel setup.

•Set to Audio, the current TV channel will be audio muted.

•Set to Video, the current TV channel will be video blanked.

■Auto Install: “Start”

Note

It is important to understand the difference between physical channel numbers and TV program numbers. When Auto Install is selected, the TV first scans for digital channels, starting at a physical (RF) channel 2 and then increasing in frequency to 3, 4, .... The first digital

program it finds will be installed on TV program 1, the second on TV program 2 etc. Then the TV scans for analog channels. For the sake of discussion, let’s assume that the TV found 36 digital programs. Then the first analog channel found would be installed as TV program 37, the second as TV program 38 etc. This could be a big change as most hybrid analog/digital systems have the analog programs on the lower physical channels and the digitals on the higher. But this is only the initial order that the Auto Install creates - the final order of the channel map that you wish to present to the guest is fully programmable.

■Cable Tuning: “Yes”, “No”

17