Philips 42HFL3XX8D/10, 26HFL3XX8D/10 Hotel Information, How to upload Welcome Logo

Page 28

7. Welcome Logo

IMPORTANT: Total amount of size for Hotel Information and Welcome Logo MUST be smaller than 12 Mb(megabyte)

There are 2 Philips logos displayed at startup. The second logo can be replaced by picture uploaded via USB. File format: 1280 x 720.png file.

Note: below timing values are approximate indications and can differ from real situation!

How to upload Welcome Logo

1.Create graphics file: 1280 x 720.png with logo.

2.File name: TPM1012HE_WelcomeLogo.png (File name is case-sensitive)

3.Save into the TV cloning data folder “TPM1012HE _CloneData”

4.Insert USB device into TV

5.Enter Professional settings menu

6.Select “Welcome logo”

7.Select USB -> TV

8.Select “Display logo”

9.Select “On” to enable Welcome Logo

10.Store setting when exiting the Professional setup menu

7.1 Hotel Information

Any JPEG can be used for the Hotel information and triggered from consumer menu screen.

How to upload page Hotel Info

1.Create JPEG’s graphics file with maximum resolution 1920 x 1080.

2.File name: TPM1012HE_HotelInfo.jpeg (File name is case-sensitive)

a. For multiple files as Hotel Info the names should be consecutive (TV will create a slideshow) Example for 4 pictures as Hotel Info: TPM1012HE_HotelInfo.jpeg

TPM1012HE_HotelInfo1.jpeg

TPM1012HE_HotelInfo2.jpeg

TPM1012HE_HotelInfo3.jpeg

3.Save the file into the TV cloning data folder TPM1012HE _CloneData

4.Insert the USB device into the TV

5.Enter Professional settings menu

6.Go to Hotel Info

7.Select USB -> TV

8.Select “Display information”

9.Select “On” to enable Hotel Information

10.Store setting when exiting the Professional setup menu

27

Image 28
Contents Philips Hospitality TV Contents Requirements before starting the installation Disable the Professional Settings Find out the state of the TVRe-install TV Page Installation wizard Page Page Options from the Settings menu are Page Page Only way to re-use this wizard is to reinstall the TV set Channel options Reordering channelsPage Rename channels Hide channelsProfessional Settings Reset Switch on settingsSwitch on channel Switch on volumeMaximum volume Switch on picture formatSmart Power Welcome messageLine ClearMessage Time-out Display logoHotel Information Info key enableDisplay information RC lock OSD displayHigh security Auto scartEnable teletext Enable MhegEnable EPG Enable subtitleDigit timeout Clock settingsSelectable AV Watch TVSpeaker settings TV speaker enableDefault main speaker volume Installation Blank channelAuto channel update Auto software updateSkip scrambled signals Multi remote controlThemeTV Configuration MyChoice configurationCombine channel list How to upload Welcome Logo How to upload page Hotel InfoWelcome Logo Hotel InformationInstant initial cloning and software upgrade CloneMulti RC Feature settingsTheme TV Page Package 1 = Free Channels + Extra channels Page CSM Consumer Setup menu