Philips 26HFL3XX8D/10, 42HFL3XX8D/10, 22HFL3XX8D/10, 32HFL3XX8D/10 installation manual

Page 33

Each package can be configured independently without having any influence on other packages, but you have to keep in mind that after activation the TV will show only the channels which are ticked for this package.

Press Menu to exit the Professional menu and store all settings.

5.Check the MyChoice functionality.

Power ON the TV and wait to see the Switch on channel. Press the MyChoice button on the remote control.

The following window will appear on TV:

Enter the pin code received from the website or generated with a scratch card. After entering the pin code press OK to submit the code.

If the pin code is correct, the following message will be displayed. Also the message will display the remaining viewing time.

After few seconds the message will disappear and the channel grid will pop up showing all channels available. The MyChoice channels will have a star inside the box.

If you enter an invalid pin code or an expired pin code the following message will be displayed.

Note: If you do a power cycle of the TV and press the MyChoice button again, you can enter the same pin code if this code is still valid.

Important remark: If you enter a new pin code, the previous code will become invalid despite the fact that code could be still valid.

Example: If you enter a pin code for Package 1 valid for 24 hours and after 4 hours you entered a pin code for Package 2, the pin code for Package 1 will become invalid; the TV will report the message above.

The TV will only save the last pin code entered; the previous ones will become expired.

32

Image 33
Contents Philips Hospitality TV Contents Requirements before starting the installation Find out the state of the TV Disable the Professional SettingsRe-install TV Page Installation wizard Page Page Options from the Settings menu are Page Page Only way to re-use this wizard is to reinstall the TV set Reordering channels Channel optionsPage Hide channels Rename channelsProfessional Settings Switch on settings ResetSwitch on channel Switch on volumeSwitch on picture format Maximum volumeSmart Power Welcome messageClear LineMessage Time-out Display logoInfo key enable Hotel InformationDisplay information OSD display RC lockHigh security Auto scartEnable Mheg Enable teletextEnable EPG Enable subtitleClock settings Digit timeoutSelectable AV Watch TVTV speaker enable Speaker settingsDefault main speaker volume Installation Blank channelAuto software update Auto channel updateSkip scrambled signals Multi remote controlMyChoice configuration ThemeTV ConfigurationCombine channel list How to upload page Hotel Info How to upload Welcome LogoWelcome Logo Hotel InformationClone Instant initial cloning and software upgradeFeature settings Multi RCTheme TV Page Package 1 = Free Channels + Extra channels Page CSM Consumer Setup menu