Channel Install, ∙ Channel, ∙ Source, ∙ Ring

2005 HF Series User’s Manual	112505.0959
CHANNEL INSTALL	(>)

The CHANNEL INSTALL menu allows the user to configure the channels that can be accessed. When installing the channels, different inputs can be mapped to TV channels to allow seamless integration into the channel map. The two sections below explain how to install analog channels and AV inputs, and how to install digital channels.

Installing Analog channels

When selected, CHANNEL INSTALL menu appears as follows. Configure the inputs and channels as described.

	CHANNEL INSTALL
CHANNEL		TV 1 – 125
SOURCE	ANALOG/DIGITAL / AV 1 / AV 2 /HDMI 1/HDMI 2/SIDE AV
RING		SAVED
LABEL	(	) >
AUTO INSTALL TV		>

∙CHANNEL:

Select the channel you wish to configure.

∙SOURCE:

Select the input source that you wish to associate with the specified CHANNEL. This feature enables you to “map” (re-assign) a numeric channel number to a video input, rather than to its normal RF TV channel (i.e. ANALOG). In other words, TV channel 2 could be used to select the AV 1 video input instead of RF (ANALOG) channel 2. Special instructions for mapping digital channels are included below.

∙RING:

Specify whether the current channel or input is to be SAVED to or DELETED from the cha nnel ring (i.e., list of channels available for selection by means of a standard guest remote control).

∙LABEL:

Input a maximum of 8 characters for the channel’s label. Cursor to the right to start

the first character. Cursor left or right to navigate between character positions within the label field. Cursor up or down to select characters from the list: A to Z, 0 to 9, -, ., /, :, =, ?, ;, <, >, @ or space. To edit, re- input the character at its position. To exit, press “M” to navigate out of the label editing field.

∙AUTO INSTALL TV:

When AUTO INSTALL TV is selected, the TV performs an automatic search for the presence of viable RF analog signals at its tuner input. Channels 1 through 125 will be checked. When a viable signal is detected on a given channel, that channel is added to the channel ring. Any command from a remote control terminates the AUTO PROGRAM session.

2005 HF Series User’s Manual

CHANNEL INSTALL