Display User Manual
3D Solutions
3.7Cleaning instructions
Before cleaning the display, disconnect the power cord and DVI cable.
It is preferable to clean the front of the display with the cleaning products listed in the table below.
To clean we recommend: |
|
cleaning materials | e.g. soft cotton cloth |
| window leather |
Aqueous solution, neutral and weakly | e.g. Flux |
alkaline window cleaner without | Ajax |
additives of abrasive substances: |
|
Permitted portion of ammonia < 5 |
|
| |
organic solvents < 5 |
|
Do not use for cleaning: |
|
alkaline lyes | e.g. durd soap, certain textile detergents |
lyes | e.g. toilet cleaner |
acids | e.g. hydrochloric acid, vinegar, lemon |
decalcification agent | e.g. citric acid |
degreasing agent | e.g. acetone, methylene chloride, |
| trichloroethylene, petrol |
Strong ammonia detergents | e.g. Toilet cleaner |
chlorine or Hypochloride detergents | e.g. Chavel water, Domestos |
solvents | e.g. Ethyl alcohol, Isopropyl alcohol, |
| alcohol, acetone, trichloroethylene, |
| benzene, hexane, petrol |
coarse millinery | e.g. abrasive, steel wool, sponge with |
| abrasives, blades cloth with thread |
| made of steel, hard cloth or paper |
| tissue |
Other | Electrolube ASC, REF ASC250ml |
As an alternative, clean the front of the display with a solution of soft soap (e.g. liquid hand soap) and tepid water, using a soft cloth or sponge.
The rest of the display can be cleaned with a dry cloth.
23 September 2008
©2008 Philips Electronics Nederland B.V. | 15 of 26 |