Philips 42-3D6C02/00 Cosmetic specifications Description, Environmental conditions of inspection

Page 9

Display User Manual

3D Solutions

2.3Cosmetic specifications

2.3.1Description

This specification standard is applicable to: 3D-displays supplied by Philips 3D Solutions.

2.3.2Environmental conditions of inspection

The environmental conditions and visual inspection shall be conducted as below. Ambient temperature in the range 15-25 [oC].

Humidity in the range 25-75 [%RH].

The functional inspection distance of the monitor (measured between the monitor and the inspector’s sight) should be at least 3.0 [m].

The maximal viewing angle relative from the normal direction of the module/monitor is specified according to ±Y degree to the front surface of the display in vertical direction, and ±X degree to the front surface of the display in horizontal direction. The values below are the following: X = 15, Y = 45. Ambient illumination:

ƒExternal appearance inspection in the range 400-600 [Lux]. Light on inspection in the range 100-200 [Lux].

2.3.3Classification of defects

The defects are classified as major and minor defects. The definition of defects is described as follows: Major defect:

The defect may cause functional failure, or reduce the usability of the product for its purpose. For example: electrical failure, deformation, etc.

Minor defect:

The defect does not reduce the usability of the product for its purpose. For example: dot defect, etc.

The judgement of the major and minor defects shall be according to the table with classification of defects below.

Inspection item

Description

Defect type

Vertical line

Abnormal line appears in vertical direction.

Major

Horizontal line

Abnormal line appears in horizontal

Major

 

direction.

 

Cross line

Abnormal cross line appears in display.

Major

No display

No signal output in display.

Major

Irregular display

Abnormal signal outputs in display.

Major

Dot defect

Bright dot, dark dot or dot adjacent appear

Minor

 

in display.

 

Foreign material

Foreign material appears in display

Minor

23 September 2008

©2008 Philips Electronics Nederland B.V.

9 of 26

Image 9
Contents Philips 3D Solutions Safety Instructions for 3D display Page Document Information Info ContentTable of Contents 3D SolutionsIntroduction Multi-view Lenticular Display Product features Global product featuresGroup 42-3D # Technical aspects and detailsCosmetic specifications Description Environmental conditions of inspectionClassification of defects Display defects Inspection Criteria3D Solutions Scope of supply, Set up and mounting Scope of Supply Installation locationsImage retention Mounting Using the mounting bracketFitting the table stand Positioning the displayConnecting the display Cleaning instructions Disposal of your old product Software installation Minimum PC requirementsPrepare PC Approbations USA and CanadaCB Certificate Condition Operating Shipping / storage EnvironmentalInterfaces DVI-in Pin SignalLED LED Color StatusTrademarks, Copyrights and disclaimer Manufacturer / Support Mounting bracket Hole pattern on mounting bracket Location of mounting bracket relative to display Rear view Description References
Related manuals
Manual 25 pages 8.24 Kb Manual 25 pages 19.56 Kb

42-3D6C01/00, 42-3D6W01/00, 42-3D6C02/00, 42-3D6W02/00 specifications

Philips has long been known for its commitment to innovation and quality in the world of lighting solutions. Among its impressive product lineup, the Philips 42-3D6W02/00, 42-3D6W01/00, 42-3D6C02/00, and 42-3D6C01/00 models stand out due to their array of advanced features and cutting-edge technologies.

These models are designed to cater to the needs of both residential and commercial spaces, offering flexibility alongside high performance. A prominent feature of these Philips products is their energy efficiency. They incorporate energy-saving technologies that significantly reduce electricity consumption while providing consistent lighting quality. This not only helps in lowering energy bills but also contributes to a more sustainable environment.

The design of the Philips 42-3D6 series reflects contemporary aesthetics, making these models versatile for various settings. Available in different finishes, they can seamlessly blend into existing decor, enhancing the ambiance of any room or workspace.

The 42-3D6W02/00 and 42-3D6W01/00 versions are particularly known for their ability to produce high luminous efficacy, ensuring that the spaces they illuminate are bright and welcoming. Meanwhile, the 42-3D6C02/00 and 42-3D6C01/00 variants focus on color temperature options, enabling users to adjust the light warmth according to their preferences. This flexibility allows for personalized lighting environments that can significantly affect mood and productivity.

Moreover, these models feature advanced optical technologies that minimize glare while maximizing illumination spread. This is particularly beneficial in office settings where focus and comfort are paramount.

Additionally, Philips has included smart technology compatibility in this series, allowing users to control their lighting through mobile apps or home automation systems. These functionalities enhance user convenience and provide opportunities for creating dynamic lighting scenarios tailored to any occasion.

In summary, the Philips 42-3D6W02/00, 42-3D6W01/00, 42-3D6C02/00, and 42-3D6C01/00 models exemplify the brand’s dedication to innovation, energy efficiency, and user-centered design. With their combination of advanced lighting technologies, aesthetic versatility, and smart features, these products represent an excellent choice for anyone looking to enhance their lighting environment while being mindful of their energy consumption.