Using your TV as a PC monitor
Use an
Caution
•Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supported screen resolutions
The following screen resolutions are supported in PC mode:
Resolution | Refresh rate |
640 x 480 | 60Hz |
800 x 600 | 60Hz |
1024 x 768 | 60Hz |
1280 x 768 | 60Hz |
1360 x 768 | 60Hz |
1920x 1080 | 60Hz |
Changing sound settings
1 Press MENU on the remote control and select [Sound].
Picture | Auto Sound | Standard | ||
|
|
|
|
|
Sound |
|
| Equalizer |
|
Setup | Virtual Surround Sound | On | ||
Features | Auto Volume Leveling | Off | ||
Language | TV Speakers | Speakers EasyLink | ||
USB | Audio Setting | Stereo |
2 Press Î or ï to highlight a sound setting and press OK to select the setting.
3 Adjust the following items.
[Auto Sound]
Press Î or ï to select the desired setting, then press OK. ([Personal], [Standard], [Movie], [Music] and [News])
[Equalizer]
Adjust tone quality for each frequency.
Press Í or Æ to select the specific frequency, then press Î or ï to adjust the level.
[Virtual Surround Sound]
This selects the modes for more spatial or surround sound reproduction. Press Î or ï to select the desired option, then press OK.
On | The Virtual Surround Sound will be effective. |
Off | The original sound will be output. |
[Auto Volume Leveling]
Auto Volume Leveling keeps a constant loudness differential between the TV commercials and the programs.
Press Î or ï to select the desired option, then press OK.
On | Select if you want to reduce volume differences | |
between the TV commercials and the programs. | ||
| ||
Off | Select if you want to invalidate the AutoVolume Leveling. |
[TV Speakers] |
|
|
|
|
|
| |
This option will allow you to select the audio output from the | i s h | ||
unit’s speakers. If you have an amplifier which is compatible with | |||
the HDMI CEC function connected to this unit using an HDMI | n g l | ||
cable, some sound operations such as volume up can be used with | E | ||
| |||
this unit’s remote control. |
| ||
Press Î or ï to select the desired option, then press OK. |
| ||
|
|
|
|
On | The sound will be output from the unit’s speakers. |
|
|
Off | The sound will not be output from the unit’s speakers. |
|
|
Speakers | You can control audio output from your connected |
|
|
EasyLink | HDMI link devices by using this unit’s remote control. |
|
|
[Audio Setting]
You can set the output mode as a default for the sound mode (NTSC only).
This setting is not interlocked when you change the output mode by pressing SAP. (see ‘Switching audio mode’ on page 14).
Press Î or ï to select the desired option, then press OK.
Stereo | Outputs |
Mono | Outputs |
SAP | Outputs second audio program |
4 Press MENU to exit.
Summary of sound settings
The following sound settings can be configured. Depending on the sound source, some sound settings are not available.
•[Auto Sound]: Sets all sound settings to the factory default.
•[Equalizer]: Adjusts individual sound frequencies.
•[Virtual Surround Sound]:This selects the modes for more spatial or surround sound reproduction.
•[Auto Volume Leveling]: Reduces sudden changes in volume, for example, during commercials or when switching channels. Select [On] or [Off].
•[TV Speakers]: Select [On] or [Off], or output sound to an EasyLink compliant device.When [Speakers EasyLink] is selected, the TV speakers are disabled and TV sound outputs to the speakers of the compatible EasyLink compliant device. Adjust the volume using the unit’s remote control.
Note
•If the TV is connected to a
Changing auto sound mode
1 Press AUTO SOUND to set your TV to a predefined sound setting.
2 Press Î or ï to select one of the following settings:
•[Personal]:The customized settings you defined by using the [Sound] menu.
•[Standard]: For normal TV viewing.
•[Movie]: Realistic sound settings for a cinematic experience.
•[Music]: Emphasize high and low freq. for instrument sound.
•[News]: Clear sound settings for human voice.
EN 17