Philips 32PFL4355/V7, 32PFL4755/V7, 42PFL4755/V7 user manual Setup Menu, Geometric Menu

10 Setup Menu

SETUP

Program Number	Display the program/Channel number of the current channel
Skip	Make this switch On to skip the selected channel,
	the skipped channel can be viewed by entering channel number
Program Name	To give the channel name press Ok on this option and use
	Up/Down key to select letters and Left/Right key to navigate
Color System	Change the color system(AUTO/PAL/SECAM) setting if
	picture is not reproduced properly
	Note : For INDIA Color system is AUTO or PAL
Sound System	Change the sound system (BG/I/DK) setting if sound is not
	reproduced properly
	Note : For INDIA Sound system is BG
Auto Search	Selec this function,TV set will start auto tuning, for all
	available channels
Manual Search	Select this function for Manual Searching the channels, select PR start-on
	which user want manual search Start from-the frequency from which
	the tunning will start start search-press Ok to start manual tunning
Update Search	Use this function to update the new frequencies in transmition
	or deleted channels and appends last to the current list of
	channels without disturbing them.
Fine Tunning	Select this option for Fine tunning the channel at which either
	Picture or Sound is not clear even after Auto Searching.
	User can edit the programs by Swap, Insert, Copy, Delete operation
	1.To swap, Navigate to a channel to be swapped (selection bar
	appears on it) press 1, navigate to another channel press OK,
Program Edit	these two channels are swapped
	2.To insert, Navigate to a channel press 2, navigate where the channel
	has to be inserted press OK the selected channel will be inserted here
	3.To copy, Navigate to a channel press 3, navigate where the channel
	to be copied press OK the selected channel will be copied here
	4.To delete, Navigate to a channel to delete, press 4, the channel will be deleted.

11 Geometric Menu

	Contrast	Adjust these settings for fine adjustments of the Contrast
	Brightness	(0-100), Brightness(0-100) of pc picture onTV screen
	Auto Setting	Auto setting allows the PC screen of TV to self adjust.This
		automatically sets the H-position ,V - position, Phase and clock
GEOMETRIC	Phase	Adjust the phase(0-31) and clock(0-255) to remove or reduce
	Manual Clock	picture noise.if noise appears adjust frequency by clock for
		fine adjustments
	H Position	If picture is not Ok with auto setting then adjust Horrizontal
	V Position	position(0-255) / Vertical position (0-63) manually to adjust
		the desired picture settings

Note : 1) The Geometric menu will be enable for VGA/PC source only. SETUP, VIDEO menu is disable for VGA source.

2) SETUP menu is disabled when PIP/POP is ON.

3) SETUP menu is disabled when parental switch is ON, simillarly when hotel mode switch and disable

search is ON user can not enter SETUP menu.

EN 15