3 Antenna and External Equipment Connection
ANT IN
ANT IN
1. The aerial cable should not be bundled to the power cord.
ANT IN
Y1 Pb1 Pr1 | L1 YPbPr1 R1 | Av1 |
| AV1 |
|
COMPONENT (YCbCr/YPbPr) DVD INPUT
1. Connect the component outputs (YCbCr / YPbPr) of DVD player to the component (YPbPr1 / YPbPr2) input of the TV.
2.Connect audio outputs (L,R) of a DVD player to the audio input (YPbPr1 / YPbPr2) respectively.
3.Press the PLAY button on the DVD player.
|
|
|
| VIDEO INPUT | |
|
|
|
| 1. | Connect the component outputs VIDEO out |
L | YPbPr1 | R | Av1 | of VCR/Cable receiver to AV1, AV2. | |
| AV1 |
|
| 2. | Connect audio outputs (L, R) of a DVD player to the |
|
|
|
| ||
|
|
|
| audio input AV1, AV2 respectively. | |
|
|
|
| 3. Press the PLAY button on the VCR. | |
Note : Selecting a Source
Press SOURCE key on remote or on front panel keypad.
A source OSD will appear to select a source press OK/Right key on the remote or '+' key from front panel. Press SOURCE key repeatedly to
change and select source. Up/Down key on the remote or 
/
on front panel can be used to change sources.
Press TV key on the remote to enter into TV source from any other source.
EN 5