Cable colours
Cables are often colour coded. Connect like colour with like colour. For example, con- nect red to red.
The labels for the component video sockets can differ depending on the DVD player connected.
Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively. The letter Y indicates the luminance signal.
Refer to the user manual of your DVD player for definitions and information about connections.
For optimal viewing, switch your equipment to the highest supported display mode.
Warning: If you notice problems such as scrolling images, wrong colours, no colour or no picture, verify that your TV is con- nected correctly.
Verify also that the resolution and the signal standard of the peripheral equipment is correct.
For information about the resolution and the signal standard of the peripheral equipment, see the user manual for the equipment.
your PC to the TV with a DVI to HDMI
cable (1). EN
2.Connect the audio cable to the audio jack on the PC and to the L/R AUDIO jack on the EXT3 of the TV (2).
3. Press the
key on the remote con- trol. The source list is displayed.
4. Press the ï key to select HDMI1 or
HDMI2 and press the Æ / 
key to confirm your selection.
Side of TV |
| Rear of TV | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
21
Connecting a PC
Note: The digital output of the PC can be connected via DVI to HDMI cable. Connec- tion by VGA is not supported.
Before you connect your PC to the TV, configure your PC with a monitor refresh frequency of 60 Hz.
Connecting a PC with a DVI connector
1. As shown in the following figure, connect
Supported PC resolutions
640 x 480, 60 Hz | 800 x 600, 75 Hz |
640 x 480, 72 Hz | 800 x 600, 85 Hz |
640 x 480, 75 Hz | 1024 x 768, 60 Hz |
640 x 480, 85 Hz | 1024 x 768, 70 Hz |
800 x 600, 60 Hz | 1024 x 768, 75 Hz |
800 x 600, 72 Hz | 1024 x 768, 85 Hz |
For LCD TVs only
1280 x 768, 60 Hz
1280 x 1024, 60 Hz
1360 x 768, 60 Hz