Philips 29PFL4908/F7 Color alignment Mode, Noise reduction Auto, Medium, Dynamic contrast Maximum

	PC	to Turn Off image enhancement
		features which makes the TV to
Mode selection		act purely as a monitor
	HDTV	to enable image enhancement
		features to improve picture
		quality
Auto adjustment	to adjust the horizontal / vertical position, clock and
	phase of the PC screen automatically
	Cursor ◄	Cursor ►
Clock	to decrease setting	to increase setting value
Phase	value
Horizontal position	to move PC screen	to move PC screen right
	left
Vertical position	to move PC screen	to move PC screen up
	down

You can set a particular about picture quality in Advanced settings.

Auto picture		Color alignment		Mode
Backlight		Noise reduction		Auto
Contrast		Light sensor		On
Brightness		Black stretch		Medium
Color		Dynamic contrast		Maximum
Tint		Gamma
Sharpness		Motion Rate		Off
Advanced settings Dynamic backlight				Maximum
			to set the color temperature to
		Mode	Personal, Cool, Normal and Warm
			When you adjust the following
			settings, Personal will be set
			automatically.
			Cursor ◄		Cursor ►
		Red gain	to decrease		to increase
			contrast with red		contrast with red
		Green gain	to decrease		to increase
			contrast with		contrast with
Color alignment			green		green
		Blue gain	to decrease		to increase
			contrast with blue		contrast with blue
		Red offset	to decrease		to increase
			brightness with		brightness with
			red		red
		Green offset	to decrease		to increase
			brightness with		brightness with
			green		green
		Blue offset	to decrease		to increase
			brightness with		brightness with
			blue		blue
Noise reduction	to select the desired setting, then press OK
	(Off, Minimum, Medium, Maximum and Auto)
		Off	to set Light sensor to Off
Light sensor*1			to adjust backlight for the best picture
		On	quality by dynamically adjusting the
			backlight intensity in accordance with
			lighting condition in the room
Black stretch	to select the desired setting, then press OK
	(Off, Minimum, Medium and Maximum)

28

Dynamic contrast	to select the desired setting, then press OK
	(Off, Minimum, Medium and Maximum)
Gamma	Cursor ◄		Cursor ►
	to adjust the gamma encoding of images
Motion Rate	Off	to set Motion Rate to Off
	On	to make the video appear smooth
Dynamic	to select the desired setting, then press OK
backlight*2	(Off, Minimum, Medium and Maximum)
MPEG artifact	to select the desired setting, then press OK
reduction	(Off, Minimum, Medium and Maximum)
Color	Off	to set color enhancement to Off
enhancement	On	to make colors more vivid and bright
	to select the desired setting, then press OK
	(Red, Yellow, Green, Cyan, Blue and Magenta)
		Cursor ◄	Cursor ►
		to rotate only	to rotate only
			selected color tint
	Tint	selected color tint
			in
Custom color		in clockwise
			counterclockwise
management		direction	direction
	Saturation	to decrease color	to increase color
		with only selected	with only selected
		color	color
	Brightness	to decrease	to increase
		brightness with	brightness with
		only selected color	only selected color
Film mode	Off	to set film mode to Off
	Auto	to optimize the picture recorded by
		the original film

Note

•Mode selection is available only if

–the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.

–the connected HDMI device is outputting a video signal.

•Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when Light sensor*1 is set to On. Please ensure the room lighting is stable and the light sensor is not blocked.

*1 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 / 39PFL2908 / 39PFL2608 only.

*2 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 only.

English