Philips 29PFL4908/F7 user manual Connection test

IP configuration

In following cases, select IP configuration to set each setting as necessary.

– When connection test failed with the setting of Connection test.

– When instructed by your Internet service provider to make specific settings in accordance with your network environment.

3 Use ▲▼ to select IP configuration, then press OK.

4 Use ▲▼ to select a setting, then press OK.

Network selection		IP setting mode		Manual
Wireless network setting		IP address		192.168.11.3
IP configuration		Subnet mask		255.255.255.0
Proxy configuration		Default gateway		192.168.11.1
		Primary DNS		192.168.11.1
		Secondary DNS		0.0.0.0
		MAC address		00:12:0E:10:09:15
IP setting	Auto		Sets the IP setting automatically.
mode	Manual		Sets the IP setting manually.
IP address*1, 3			A set of numbers which are assigned to
			devices participating in a computer network.
Subnet mask*1, 3			A mask which is used to determine what
			subnet an IP address belongs to.
Default gateway*1, 3			IP address of the network device (such as
			router) which provides Internet access.
DNS setting	Auto		Sets the DNS setting automatically.
mode	Manual		Sets the DNS setting manually.
Primary DNS*2, 3			A server which handles the name and IP
			address over the Internet.
Secondary DNS*2, 3			A server which handles the name and IP
			address over the Internet.
MAC address			An address which recognizes the devices
			connecting to the network. It is also called
			Hardware Address.

*1Items can be selected only when IP setting mode is set to Manual. *2Items can be selected only when DNS setting mode is set to Manual.

*3Use ▲▼ or the NUMBER buttons to input numbers. When you use ▲▼ to input numbers, then press OK or input the triple digits by using the NUMBER buttons, the cursor moves to the next entry field. When you use ▲▼ to input numbers, then press OK or input the triple digits by using the NUMBER buttons at the rightmost entry field, numbers will be stored and go back to the previous menu.

Note

•The range of input numbers is between 0 and 255.

•If you enter a number larger than 255, the number will automatically be 255.

•The manually entered number will be saved even if you change the setting to Auto.

•If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.

•If the entered IP address or the default gateway or primary DNS number is same as the default setting, IP address setting will be set to Auto. (The manually entered number will be saved).

•When IP address setting is set to Manual, the setting of DNS setting will automatically be Manual and when IP address setting is set to Auto, you can set either Auto or Manual for DNS setting.

39 English

Proxy configuration

3 Use ▲▼ to select Proxy configuration, then press OK. 4 Use ▲▼ to select a setting, then press OK.

Network selection Proxy setting Do not use

Wireless network setting

IP configuration

Proxy configuration

•Do not use is selected for default settings.

•If you need to change the proxy setting as instructed by your Internet service provider to set the designated proxy address and port, select Use.

Proxy setting	Do not use	Not use the proxy server.
	Use	Uses the proxy server.
Proxy address*		Selects the number or word by using
		▲▼◄►, then press OK.
Proxy port*		Use ▲▼ or the NUMBER buttons to input
		numbers.

*Items can be selected only when Proxy setting is set to Use. Note

•The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)

•For proxy port, the selected ports may be blocked and not be able to use depending on your network environment.

•If the proxy address is entered with blank only, proxy server setting will be set to Do not use.

Connection test

Perform the following steps to test your Internet connection after you have connected an Ethernet cable or entered network settings such as IP address, DNS settings, etc. manually.

2 Use ▲▼ to select Connection test, then press OK.

3 Press OK to select Start now.

•Connection test will start automatically and the test result for Home Network and Internet will appear right after the connection test finishes.

•“Testing…” is displayed while the connection test is in progress.

Home network		Internet	Description
	Pass	Pass	Connection test is successfully completed.
	Fail	-	Connection test for Home Network failed.
			Check the connection settings.
	Pass	Fail	Connection test for Internet failed. Check the
			connection settings.
	• If the connection test for Internet passes, speed test will start
4	automatically.
	Press OK to go to the list of network status confirmation screen.

Note

•If the connection test for both Home Network and Internet pass, you are ready to use Net TV or network upgrade function using the internet without making any additional settings.

•If the connection test fails, check if the Ethernet cable is connected to this TV properly or if you have entered all the required details for the wireless LAN connection properly.