Philips 26PFL3405/12 Use Philips EasyLink, Use a Kensington lock, Enable or disable EasyLink

Use Philips EasyLink

Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.

Note

•The EasyLink-compliant device must be switched on and selected as the source.

•Philips does not guarantee 100% interoperability with all HDMI CEC devices.

Enable or disable EasyLink

Note

•Do not enable Philips EasyLink if you do not intend to use it.

1Press MENU.

2 Press to select [Setup] >

[Installation] > [Preferences] > [EasyLink].

3Select [On] or [Off].

Use one-touch play

1After enabling EasyLink, press play on your device.

»TheTV automatically switches to the correct source.

Use one-touch standby

1Press (Standby-On) on the TV’s or device’s remote control.

»TheTV and all connected HDMI devices switch to standby.

Use a Kensington lock

There is a Kensington security slot at the back of theTV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.

28EN