In this sub menu, the Control settings of the TV can be configured.
∙ ESP: Energy Saving Programmability Mode (ESP) controls the maximum continuous viewing time allowed by the control system. The ESP Menu function is shown as "ESP", and its valid values are OFF and 1 - 99 (in hours).
∙ Audio/Video Mute: The Audio/Video Mute menu function determines whether the video should be blanked and the audio muted, if the currently tuned channel has no signal.
∙ Digit Timeout: This is the time- out to enter the second digit of channel number (example: for channel number 10 and above).
∙3 Digit Entry: To allow for
∙Source Menu Item: Toggle between “YES/NO” to enable or disable selection of the TV Source Input via the guest Setup menu when using the guest Remote Control.
∙Channel Guide: Select “YES” to allow the Channel Guide Menu to be displayed if the “Channel Guide” button is pressed on the guest Remote Control. Select “NO” to disable this feature.
∙Min Volume: This item sets the limit for minimum volume allowed for the television set. Use the Right/Left cursor buttons or direct digit entry to adjust.
∙Max Volume: This item sets the limit for the maximum volume allowed for the television set. Use the Right/Left cursor buttons or direct digit entry to adjust.
In this sub menu, the Close Caption and V - Chip settings of the TV can be configured.
∙ Save CC: This menu item provides the option of saving the Close Caption selection when the television is switched OFF is “Yes” is selected..
∙ CC: This menu item allows selection of Close Caption channels, or to turn Close Caption “OFF”.
∙ Saved V
∙
∙
- 8 -