
Manual tuning
This menu allows you to store the programmes one by one.
&Press H.
éSelect INSTALL (J), then press L. The INSTALL menu appears.
“Select MANUAL STORE (J) then press L. The menu appears :
INSTALL
• PICTURE |
| MANUAL STORE |
| |||
• SOUND |
| EUROPE | ||||
• FEATURES |
| • SYSTEM | ||||
• INSTALL | ||||||
| • SEARCH | WEST EUR | ||||
|
|
|
| |||
|
|
|
| • PROG. NO. | EAST EUR | |
|
|
|
| • FINE TUNE | UK | |
|
|
|
| • STORE | FRANCE |
‘Press Lto go to the SYSTEM menu. Use IJto choose EUROPE (automatic detection*) or manual detection with WEST EUR (standard BG reception), EAST EUR (standard DK reception), UK (standard I
reception) or FRANCE (standard LL'). Then press Kto exit from the menu.
*Except for France (standard LL'): select the option FRANCE.
(Select SEARCH and press L.
The search begins.As soon as a programme is found, the search will stop. If you know the
frequency of the programme required, enter its number directly using the 09keys and go to step è.
If no programme is found, refer to the Tips chapter on page 14).
§If reception is
TUNE and hold down Kor Lkey.
èSelect PROG. NO (programme number) and use the KLor 0to 9keys to enter the desired number.
!Select STORE and press L.The message
STORED appears.The programme is stored.
çRepeat steps ( to ! for each programme to be stored.
To exit: press the Rkey.
Programme name
You may, if you wish, give a name to the first 40 programmes (from 1 to 40).
&Press H.
éSelect INSTALL (J), then press L. The INSTALL menu appears.
“Press J5 times to select NAME (concealed at the bottom of the screen), then press L. The menu appears :
INSTALL
•LANGUAGE
•COUNTRY
•AUTO STORE
•MANUAL STORE
•SORT
•NAMEBBC_1
‘Select the programme you wish to name using the keys 09or @P #.
Note: at the time of installation, the programmes are automatically named when the identification signal is transmitted.
(Use the keys KLto move within the name display area (5 characters).
§Use keys IJto choose the characters.
è Press Hwhen the name has been entered. The programme name is stored.
! Repeat steps ‘ to è for each programme to
be named.
ç To exit from the menus, press R.
6