LG Electronics 60PV25** English, Auto Tuning and press OK, Comhem or Other Operators and press OK

			WATCHING TV 31
	Selecting Cable	,
			yyAcquired certification SO :
			Sweden(Comhem, Canal Dig-
1 Press Home to access the main menus.			ital), Denmark(YouSee, Canal Dig-
2 Press the Navigation buttons to scroll to			ital, Stofa), Norway(Canal Digital),
			Netherlands(Ziggo, UPC Digitaal),
	SETUP and press OK.		Ukraine(Volia-Cable), Germany(KDG),
			Switzerland(CableCom, UPC),
3 Press the Navigation buttons to scroll to			Austria(UPC Digital), Hungary(UPC Dig-
	Auto Tuning and press OK.		ital), Ireland(UPC Digital), Poland(UPC
			Digital), Romania(UPC Digital),
4 Press the Navigation buttons to scroll to			Russia(OnLime)(The acquired certifica-
	Cable and press OK.		tion SO can be added.)
			yyIf there are not any Service Operator
5 Press the Navigation buttons to scroll to			that you want, select Other Operators.
			yyIf you select “Other Operators”, or
	Comhem or Other Operators and press OK.
			the selected country supports “Other
6 Press the Navigation buttons to scroll to			Operators” only, it may take some time
			to search all the channels, or it may not
	Quick or Full and press OK.		search some of the channels.
7 Press the Navigation buttons or Number but-			yyIf some of the channels do not appear,
			follow the steps below:
	tons to scroll make appropriate adjustments		1. SETUP ->Auto Tuning ->Cable ->Set-
	(Except for Full mode) and press OK.		ting
			2. Switch Home Tuning from "Off" to "On"
8 Select Start to start automatic tuning.			3. Input additional values such as the frequen-
	The TV scans and saves available pro-		cy, symbol rate, modulation, and network ID.
			(You can ask your cable service provider for
	grammes automatically.
			the above information.)
9 When you are finished, press EXIT.
	When you return to the previous menu, press		The following values are needed in order to
	BACK.
			search all available programmes quickly and
			correctly.
			The commonly used values are provided as
			"default".
			However, for correct settings, please inquire
	NOTE		of the cable service provider.
			When running Auto Tuning in DVB cable
			mode, selecting Full will search through all
yyIf the TV scans a blocked programme, you			frequencies to find available channels.
	will be prompted to enter your password to		In the case when the programme is not
			searched by selecting the Default, perform the
	keep the programme scanned.
			searching by selecting the Full.
yyWhen you select the Cable, the Cable			However, in the case when the programme is
			searched by selecting the Full, the Auto Tun-
	Service Operator selection screen can differ
			ing time can be taken too much.
	or not exist by the Cable situation of the ap-		If some channels are not detected when Full
	plicable country.		is selected, select the In detail checkbox and
yyThe popup window to select Service Opera-			then try tuning again.
			• Frequency : Enter a user-defined fre-
	tor is only shown initially for the 3 cases
			quency.
	when you accessing the Initial Setting		• Symbol rate : Enter a user-defined symbol
	menu, when you change from Antenna to		rate (Symbol rate: Speed at which a
	Cable or when you access the menu after		device such as modem sends symbols to
			a channel).
	changing the Country.
			• Modulation : Enter a user-defined modula-
yyWhen you want to select Service Operator			tion. (Modulation: Loading of audio or
	aside from the above 3 cases, you can do so		video signals onto carrier).
	by selecting Setup->Cable DTV Setting->		• Network ID : Unique identifier allocated for
			each user.
	Service Operator.
			• Start Frequency : Enter a user-defined
			start frequency range.
			• End Frequency : Enter a user-defined end
			frequency range.

Downloaded From TV-Manual.com Manuals

ENGLISH