WATCHING TV 29
WATCHING TV
Connecting an antenna
Connect an antenna to watch TV while referring to the following.
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
Turning the TV on for the first time
When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.
1Connect the power cord to a power outlet.
2In Standby mode, press (POWER) to turn the TV on.
The Initial setting screen appears if you turn the TV on for the first time.
NOTE
yyYou can also access Factory Reset by accessing OPTION in the main menus.
3Follow the
Language | Selects a language to display. |
ENGLISH
Wall Antenna
Socket
NOTE
yyFor optimum picture quality, adjust antenna direction.
yyIn poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna.
yyIf the image quality is poor with an antenna connected, aim the antenna to the correct direction.
yyAn antenna cable and converter are not supplied.
Mode Setting
Power Indicator
Country
Time Zone
Set Password
Auto Tuning
Selects Home Use for the home environment.
Sets the power indicator. (When you select Home Use from Mode Setting - only
LED LCD TV)
Selects a country to display. (Depending on model)
Selects the time zone and daylight saving.
(When Russia is selected for Country)
Set the password.
(When France is selected for Country)
Scans and saves available programmes automatically.
Downloaded From