16ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yyAvoid touching the screen at all times, as this may result in damage on the screen or some of the pixels used to create images.
Setting up the TV
yyImage shown may differ from your TV.
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
(Only 42PT25**, 60PV25**, 42/50PT35**, 50PV35**, 50/60PZ25**, 42/50PW45**, 50/60PZ55**, 42/50PT45**)
1Lay the TV with the screen side down on a flat surface.
ENGLISH
yyIt is recommended to move the TV in the box or packing material that the TV originally came in.
yyBefore moving or lifting the TV, disconnect the power cord and all cables.
yyWhen holding the TV, the screen should face away from you to prevent the screen from scratches.
yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
yyWhen transporting a large TV, there should be at least 2 people.
yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.
yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
CAUTION
yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the parts of the Stand Body with the Stand Base of the TV.
Stand Body
Stand Base
3Secure the TV and the stand with the 4 screws.
Make sure to assemble the front and rear side of the stand.
Front
Rear
CAUTION
yyTighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.
Downloaded From