52ENTERTAINMENT
ENGLISH
ENTERTAINMENT
Connecting to a wired network
(Depending on model)
Connect the TV to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings.
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments.
For detail information, contact your internet pro- vider or router manual.
Internet
CAUTION
yyDo not connect a modular phone cable to the LAN port.
yySince there are various connection meth- ods, please follow the specifications of your telecommunication carrier or internet service provider.
To set up the network seetings: (Even if your TV has already connected automatically, running setup again will not harm anything),
1Press Home to access the main menus.
2Press the Navigation buttons to scroll to SETUP and press OK.
3Press the Navigation buttons to scroll to NET- WORK and press OK.
4Press the Navigation buttons to select Net- work Setting and press OK.
5If wired and wireless are simultaneously con- nected, press the Navigation buttons to select Wired and press OK.
6If you already set Network Setting, select Resetting. The new connection settings resets the current network settings.
7Select IP Auto Setting or IP Manual Setting.
-If selecting IP Manual Setting, press the Navigation and Number buttons. IP address- es will need to be input manually.
-IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the TV will automatically be allocated an IP address. If you’re using a broadband router or broad- band modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be deter- mined.
8When you are finished, press EXIT.
Downloaded From
