FUNCTIONS OF REMOTE CONTROL
&Standby button
Switch set off to standby mode.To switch on set from standby mode, press Channel +/– or Digit (0
éSound mode / 4 button
–In TV mode, it allows you to force programme in Stereo and Nicam Stereo to Mono or to choose between Dual5or Dual6. (The Mono indication on the screen is red when in forced position).
–In Teletext mode, use for teletext functions (see section on “Using the Teletext”).
“AV button
–In TV mode, press button repeatedly to cycle
through the AV channels and select the required channel.
–In Teletext mode, use for teletext functions. (see section on “Using the Teletext”).
‘Screen Format button
–In TV mode, press button repeatedly to cycle through the available screen formats channels and select the desired screen format.
–In Teletext mode, use for teletext functions. (see section on “Using the Teletext”).
(Mode / DVD buttons
– Press one of the four buttons to select TV PC, FM Radio or HD mode.
–In DVD mode, press these buttons to record (v), rewind (s), stop (u) and play (q) a CD or DVD disc.
&
é
“
‘
(
§
è
!
ç
0
§Active Control button | 1 |
|
|
Optimises the picture quality depending on the quality of the incoming signal and the ambient light conditions.
èCursor buttons
The four segments function as the Left, Right, Up and Down buttons for the selection and adjustment of menu items.
!Menu button
Displays and also exits menu on screen.
çVolume + / – button Increases or decreases volume.
0Mute button
Mutes sound.To restore sound, press button again.
1On-Screen Display (OSD) /Teletext button
–In TV mode, it displays information (programme number, sound mode, time remaining on the timer, if any). Press and hold button for 5 seconds to display the programme number permanently on the screen.
–In Teletext mode, press button to return to the main Index page.
4