Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2). The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The EXT2 socket has audio,
Video recorder
CABLE
EXT 2
VCR
Other equipment
CABLE 
Carry out the connections shown opposite, using a good quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press 0.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of the video recorder.You will then be able to record scrambled transmissions.
Satellite receiver, decoder, CDV, games, etc. Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which produces the RGB signals (digital decoder, games, etc.) to EXT1, and the equipment which produces the
To select connected equipment
Press the µ key to select EXT1,
Most equipment (decoder, video recorder) carries out the switching itself.
Side connections
S•VIDEO
VIDEO 
AUDIO 
* 
Make the connections as shown opposite.
With the µ key, select
For a monophonic device, connect the audio signal to the
AUDIO L input. Use the e key to reproduce the sound on the left and right speakers of the TV set.
Headphones
When headphones are connected, the sound on the TV set will be cut.The @P #keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Amplifier (only available on certain versions)
To connect to a
AUDIO |
9