Philips 21PT5618/01 manual Quick installation, Program sort, Program name, Name

Page 6

Quick installation

The first time you switch on the television, a menu appears on the screen and the tuning starts automatically.

Auto Store

 

Program

2

TV

470 MHz

• ••••••••••••••••••••••••••••••••

If the menu is not displayed, press and hold down the - and + keys on the TV set for 5 seconds to start the tuning.

All the available TV programs and radio stations

*will be stored. This operation takes a few minutes.The display shows the progress of the

search and the number of programs found.

At the end of the search, the menu disappears. To exit or interrupt the search, press H.

If no program is found, consult the possible solutions

p. 12.

&If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.

éIf this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast

their own sort parameters (region, language, etc.). In this case, indicate your choice using the <>

keys and validate with .

* Only on versions equipped with a radio.

Program sort

&Press key H.The Main menu is displayed on the screen.

Mainge

 

 

 

 

 

 

• Picture

 

Install

 

00

 

• Sound

 

• Language

 

 

• Features

 

 

 

 

• Country

 

01

BBC1

$Install

 

 

 

 

 

 

• Auto Store

 

02

BBC2

 

 

 

 

• Manual Store

 

 

03 ÆANGLI

 

 

 

 

 

 

 

 

 

 

 

$ Sort

Æ

04

CH4

 

 

 

 

• Name

 

05

CH5

 

 

 

 

 

éWith the cursor, select the Install menu

followed by the Sort menu.

Select the programme you want to move using

the <> keys and press .

Then use the <> keys to select the new number and validate with .

(Repeat steps and for each program you

wish to renumber.

§ To quit the menus, press d.

Program name

If required, you can give a name to the programmes and external connectors. Note: on installation, the programs are named automatically when an identification signal is sent.

&Press the H key.

éWith the cursor, select the Install menu, then

Name

Use the <> keys to select the programme to name or rename.

Use the ≤≥ keys to move around the name

display area (5 characters) and the <> keys to select the characters.

(When the name has been entered, use the

key to exit.The name is stored.

§Repeat steps to ( for each programme you wish to name.

è To quit the menus, press d.

4

Image 6
Contents Page Page Table of Contents Introduction‘ Switching on Installing your television setPositioning the television set Remote control Keys on the TV setRemote control keys VolumeProgram name Quick installationProgram sort NameOther settings in the Install menu Manual storeFeature settings Picture settingsSound adjustments Description of the adjustmentsFormats If your television is equipped with a 43 screenIf your television is equipped with a 169 screen Teletext Press You will obtainOther equipment Connecting peripheral equipmentVideo recorder Side connectionsTips Glossary General Points Connecting the aerialPositioning the TV InterferenceTable of TV frequencies EuropeL04 sofa 3111 256 Model PROD. no