Sylvania SRCD3830 instruction manual Setting the Clock

Page 9

SETTING THE CLOCK

1.) Switch the unit to Standby mode by pressing the POWER button.

2.) Press and hold the MEMORY/CLOCK button on the remote.“"24H"”(24 Hour

format) will flash in the display. Press the or button to select “"12 H"” (12 Hour format).

3.) Press the MEMORY/CLOCK button on the remote. The hour digits will flash.

Press the or buttons to set the hour. The AM/PM indication will be changed automatically according to the hour setting.

4.) Press the MEMORY/CLOCK button on the remote again. The Hour is now set and the Minute digits will start to flash in the display.

5.) Press the or buttons to set the minutes.

6.) Press the MEMORY/CLOCK button on the remote again. The Minutes are now set and the clock will start counting.

NOTE:•

Clock time is only retained while the unit is plugged into the AC outlet. In the event of a power failure,the clock will need to be reset when the power

•resumes.

Clock time is only shown when unit is in Standby mode.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SRCD3830 Important Safety Instructions Class 1 Laser Product Important NotesUnpacking and SET-UP Preparation for USEPower Source Protect Your FurnitureAC Operation Location of Controls and Indicators AT T E RY I N S TAL L AT I O N Using the Remote Controller CorrectlyVolume Adjustments Operating InstructionsGeneral Controls Setting the Clock Listening to the Radio Manual TuningPRE-SETTING Stations in the Tuner Memory Recalling Preset Stations Changing Preset StationsAntenna Information Track Number Total Playing Time Playing Compact DiscsPause Control Skip/Search / Controls To Start Playback On a Specific TrackRandom Playback All Tracks Repeat Repeat PlaybackProgrammed Playback Program Repeat Playback Timer Function Remote Control Only Sleep Timer Classic Tuner Sleep Care and Maintenance Compact Disc CareCare of the Cabinets Troubleshooting Guide
Top Page Image Contents