LISTENING TO THE RADIO
1.) Press the POWER button on the main unit or the remote control. The main display will light up with information.
2.) If necessary, press the TUNER button on the front panel of main unit or the FUNCTION button on remote control to select the Tuner function. The display will show an AM or FM station frequency. To select a different band, press the STOP/BAND button.
AM
3.) Tune to the desired frequency as follows:
Manual Tuning
Repeatedly press the 
or 
buttons until the frequency of the desired station appears on the display.
•Automatic Tuning
Press and hold the 
or 
buttons until the display begins to move, then release the buttons. The tuner will search for the next available station and stop on that station. Repeat this procedure until the tuner
stops on your desired station.
4.) Adjust the VOLUME and EQ controls as desired.
5.) If you have tuned to a FM Stereo station, the STEREO indicator will appear in the display.
6.) When you are finished listening, press the POWER button on the main unit or remote control to return to the Standby (Power Off) mode.
9