HOW TO SET THE TV TO RECEIVE STEREO PROGRAMMING
You can receive broadcast stereo TV pro- grams. The TV has both an amplifier and
twin speakers through which the stereo sound can be heard.
1 Press the MENU button on the remote control to show the onscreen menu.
2 Press the CURSOR DOWN to high- light SOUND.
3 Press the CURSOR RIGHT and the menu will shift to the left. EQUALIZ- ER will be highlighted and an adjust- ment bar will be shown to the right.
4 Press the CURSOR DOWN repeated- ly until STEREO is highlighted.
5 Press the CURSOR RIGHT or LEFT to toggle the STEREO control to Stereo or Mono.
6 Press the STATUS/EXIT button to remove the menu from the screen.
HELPFUL HINT
Remember, if stereo is not present on a selected show and the TV is placed in the STEREO mode, the sound coming from the set will remain monaural.
PICTUREBRIGHTNESS
SOUNDCOLOR
FEATURES PICTURE
INSTALLSHARPNESS
TINT
6
1
5
2 3
4 5
17
| PICTURE | EQUALIZER |
| SOUND | BALANCE |
| FEATURES | AVL |
| INSTALL | INCR. SURROUND |
|
| STEREO |
|
|
|
SOUND |
| |
EQUALIZER |
| 120HZ |
BALANCE | 500HZ | |
AVL | 1500HZ | |
INCR. SURROUND | 5KHZ | |
STEREO | 10KHZ |
SOUND |
|
EQUALIZER |
|
BALANCE |
|
AVL |
|
INCR. SURROUND |
|
STEREO | STEREO |
|
|
OR |
|
STEREO | MONO |