HOW TO USE THE SURF CONTROL
Alist or series of previously viewed chan- nels can be selected with the SURF button
on your remote control. With this feature, you can easily switch between different TV chan- nels that currently interest you. The SURF control allows you to set up to ten channels in its quick viewing list.
1 Press the CHANNEL(+) or
2 Press the SURF button on the remote control. The onscreen display may read, “SURF LIST EMPTY.” The num- ber of the current channel will be shown with “ADD?” to the right.
3 While the SURF list message or the SURF channel list appears on the screen, press the CURSOR RIGHT button to add the present channel to the SURF list.
4 If you want to delete the present channel from the SURF list, press the CURSOR RIGHT button again.
Repeat steps 1 through 3 to add more chan- nels (up to 10) to the SURF list.
HELPFUL HINT
Along with regularly programmed chan- nels, the external video source connections can be added to the SURF list. This means that the external A/V Jacks and their chan- nels can be added to your SURF list. Use the Source button to tune their channel and use the same procedure described on this page.
SURF
5 ADD?
3
4
2
1
3
35
SURF
5 DELETE
SURF
5
3 ADD?
SURF
5
3 DELETE