Philips manual Specifications, 26PF5320 32PF5320 32PF7320

Tips

PC and PIP modes	• Check that you have configured the computer on a compatible display
don’t work?	resolution (refer to page 15).
Standby	• If the set receives no signal for 15 minutes, it automatically goes into
	standby mode. To save power, your set is fitted with components that
	give it a very low power consumption when in standby mode (less than 1 W).
Cleaning the set	• Only use a clean, soft and lint-free cloth to clean the screen and the
	casing of your set. Do not use alcohol-based or solvent-based products.
Still no results?	• Disconnect the mains plug of the TV for 30 seconds then reconnect it.
	• If your TV set breaks down, never attempt to repair it yourself: contact
	your dealer’s after-sales service.

Specifications

	26PF5320	32PF5320	32PF7320
Visible screen size	660 mm	800 mm	800 mm
Audio Output :	2 x 5 W RMS	2 x 15 W	2 x 15 W
TV System	NTSC M (3.58 – 4.5)
	NTSC (4.43 – 5.5)
	PAL B/G
	PAL D/K
	PAL I
	SECAM B/G
	SECAM D/K
	SECAM K1
Playback System	NTSC 3.58, NTSC 4.43, PAL 60
Set Dimensions with stand:
Width	804.5 mm	924 mm	924 mm
Depth	222 mm	222 mm	222 mm
Height	477 mm	550 mm	550 mm
Net Weight of set with	16 kg	18.2 kg	18.2 kg
stand (approximate )

Note

For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the type number at the rear of the set.

20