Philips 32HFL3330D user manual Get started, BB Warning

4.Get started

This section describes how to position and connect your TV, and how to perform your first-time installation.

4.1Position the TV

BB WARNING

•Do not insert the power plug into the wall socket before all the connections are made.

•Large screen TVs are heavy. Two people are required to carry and handle the TV.

Wherever you decide to position your TV, ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power.

If the TV is mounted on a swivel base or swivel arm, ensure no strain is placed on the AC power cord when the TV is swivelled. Strain on the AC power cord can loosen connections. This may cause arcing and result in fire.

For ideal viewing conditions, position the TV where light does not fall directly on the screen.

The ideal viewing distance for watching TV is three times its screen size.

Kensington security slot

Your TV is equipped with a Kensington Security Slot at the back of the TV.

If you connect an anti-theft Kensington lock (not supplied), position the TV within reach of a permanent object that can be attached to the lock.

4.2Wall mount the TV

BB Warning

Wall mounting of the TV should only be performed by qualified installers. Koninklijke Philips Electronics N.V. Bears no responsibility for improper mounting that results in accident or injury.

Step 1 Purchase a VESA-compatible wall bracket

Depending on the size of your TV screen, purchase one of the following wall brackets:

TV screen	VESA-compatible
	wall bracket type	Screw type
size (inches)
	(millimeters)
32PFL3403D	200 x 200mm	Metric 6 x 10mm
32HFL3330D	200 x 200mm	Metric 6 x 10mm

Step 2 Remove the TV stand

DD Note

These instructions are only applicable to TV models with mounted stands. If your TV stand is not mounted, skip to Step 3 Connect cables.

1.Carefully place the TV face down on a flat, stable surface that is covered by soft cloth.The cloth should be thick enough to protect your screen.

2.Using a cross-head screwdriver (not supplied), unscrew the four bolts that secure the stand to the TV.

EN-7

ESPAÑOL FRANÇAISE ENGLISH