2445.3 en
Manual store
Install
Language | Colour System |
Auto Store | Sound System |
Manual Store π Search | |
Sort | Channel |
Name | Fine tune |
Channel edit |
|
Searching for and storing TV channels is done channel by channel.You must go through every step of the Manual Installation menu.
&Select Manual Store in the Install menu and press the cursor right to enter.
éSelect Colour system and press the cursor right.
If Auto is selected, the respective colour system will be automatically selected according to the transmission system. If the reception is poor, select another colour system with the cursor left/right.
“Press the cursor down.
‘Select Sound system and press the cursor right. If Auto is selected, the respective sound system will be automatically selected according to the transmission system.
Note: if the reception is poor, select another sound system with the cursor left/right.
(Press the cursor down.
§Search for a TV channel:
Press the cursor down to select Search and press the cursor right to start searching.
Direct selection of a TV channel:
If you know the frequency, enter it directly with the digit keys 0 to
9. Ask for a list from your cable company or dealer, alternatively consult the Table of frequencies on the inside backcover of this handbook.
èPress the cursor down and enter the programme number with the digit keys.
!Fine tune:
In case of poor reception, you can improve the reception by adjusting the frequency with the cursor left/right.
çTo store your TV channel, select Store and press the cursor right. Repeat steps é to ! to store another TV channel.
0To exit from the menu press the MENU key on the remote control repeatedly.
15