2445.3 en
Tips
Poor Picture | • | Have you selected the correct TV system in the manual installation menu? |
| • | Is your TV or house aerial located too close to loudspeakers, |
|
| equipment or neon lights, etc.? |
| • | Mountains or high buildings can cause double pictures or ghost images. |
|
| Sometimes you can improve the picture quality by changing the direction of the |
|
| aerial. |
| • | Is the picture or teletext unrecognisable? Check if you have entered the correct |
|
| frequency. See Store TV channels, Manual store,p. 15. |
| • | Check the HDMI connection. |
|
|
|
No Picture | • | Are the supplied cables connected properly ? (The aerial cable to the TV, the |
|
| other aerial to your recorder, the VGA cables to the display, the power cables.) |
| • | Has the child lock been switched off ? |
| • | Is your PC switched on ? |
| • | Do you see a black screen and the indicator in front of the TV lights up green, |
|
| this means that the display mode is not supported. |
|
| Switch your VGA- or |
| • | In case of weak or bad signal, consult your dealer. |
|
|
|
No picture and | • | Your TV has a protective mode in case there is too much heat |
power switched on |
| Check the clearance around the vents of the device to be certain there are no |
|
| blocking walls or cabinets which would limit the air flow. |
|
| |
Digital distortion | The low quality of some digital picture material may be the cause of digital image | |
| distortion. In this case select the Soft setting using the Smart picture key a on | |
| the remote control. | |
|
|
|
No sound | • | No sound on any channel? Check the volume isn’t at minimum. |
| • | Is the sound interrupted with the mute key ¬? |
| • | When no TV signal is detected, the TV automatically switches off the sound. |
|
| This is proper operation and does not indicate a malfunction. |
|
| |
No solution found | Switch your TV off and then on again once. Never attempt to repair a defective | |
for your picture or | TV yourself. Check with your dealer or call a TV technician. | |
sound problem ? |
|
|
|
| |
Menu | Have you selected the wrong menu? Press the MENU key again to exit from the | |
| menu. | |
|
| |
Remote control | • Check if the remote control is in the correct mode. | |
| • If your TV no longer responds to the remote control, the batteries may be dead. | |
| • You can still use the MENU key and the | |
|
| |
Standby | Your TV consumes energy in the standby mode. Energy consumption contributes | |
| to air and water pollution. Power consumption: 2 W. | |
Control of | • | The infrared signals of the screen may influence the reception sensibility of |
accessory devices |
| other peripherals. |
|
| Solution: replace the batteries of the remote control of other devices. |
|
| E.g. keep away a wireless headphone from within a radius of 1 m. |
|
|
|
Miscellaneous | . | Ambient temperature: + 5~ + 40°C |
| . | Mains: 50/60 Hz |
| . | Auto Voltage ranging from: |
|
| 110 - 240V : 42PF7320; 42PF7320Z; 42PF7520Z; 50PF7320; |
|
| 220 - 240V : 37PF7320; 42PF7420; |
| . Power consumption: 37PF7320: around 167W; 42PF7320/7320Z: around 230W; | |
|
| 42PF7420: around 246W; 42PF7520Z: around 305W; 50PF7320: around 420W; |
| . | Standby consumption: < 2 W |
| . | Weight (excl. packaging): 37PF7320: 23,2 kg; 42PF7320/7320Z/7520Z: 37,3 kg; |
|
| 42PF7420: 27 kg; 50PF7320: 50 kg |
| . | Dimensions (wxhxd): 37”: 1105x610x97; 42”: 1240x680x104; 50”: 1415x780x104 |
|
|
|
22