What you need, Your 3D glasses, PTA507, PTA508

4.1

What you need

This is a 3D Max TV. On this TV, you can watch 3D programmes and movies in full High Definition resolution with 3D Max.

To watch 3D you need to :

•tune to a TV channel that broadcasts programmes in 3D

•rent a movie in 3D from an online video store with Smart TV

•watch a movie in 3D from a 3D Blu-ray Disc, a USB device or computer

Also, to watch 3D on this TV, you will need one of these types of Philips 3D Max active glasses. . .

•PTA507

•PTA508

•PTA517

•PTA518

All types are sold separately. Other active 3D glasses might not be supported.

4.2

Your 3D glasses

PTA507

Rechargeable active 3D glasses PTA507

1 - On switch / Player 1 or 2 selection 2 - LED indicator

3 - Receiver lens

Switch on

To watch a 3D picture on TV, press On on the 3D glasses and put them on. The glasses need some seconds to adjust to the 3D signal from the 3D transmitter on the TV. At first use, this may take up to 15 seconds.

Make sure the receiver lens in the centre of the glasses can receive the 3D signals. Also, clear objects away from the 3D transmitter on the TV.

Switch off

When the 3D glasses do not receive 3D signals for 2 minutes, the glasses switch off automatically.

Two-player gaming

You can use these glasses to play two-player games. Two players can watch the same TV but see two different screens to play a game.

To switch the glasses to watch the Player 1 or Player 2 screen, switch on the glasses and then press the On key repeatedly. In Help, press *List and look up Two-player gaming for more information.

Battery level

You can check the battery level when you switch on the 3D glasses.

During the first 5 seconds the LED indicator blinks . . .

•Red - if there is less than 1 hour of 3D viewing remaining

•Orange - 1 to 3 hours remaining

•Green - more than 3 hours remaining.

Charging the 3D glasses

To charge the glasses, plug in the micro USB plug and connect the standard USB plug to the TV, PC or USB hub. The TV or PC must be switched on to charge. Charging the empty battery may take up to 3 hours. A fully charged battery allows 20 hours of 3D watching.

When charging, the LED indicator is on and is . . .

•Red - charging

•Green - fully charged

Care of the 3D glasses

•Do not expose the 3D glasses to direct sunlight, heat, fire or water. This may result in a product malfunction or fire.

•Use a clean soft cloth (microfiber or cotton flannel) to clean the lenses to avoid scratching them. Never spray cleaner directly onto the 3D glasses. This may damage the electronics.

•Do not drop, bend or apply force to the lenses of the 3D glasses.

•Do not use cleaning chemicals containing alcohol, solvent, surfactant, or wax, benzene, thinner, mosquito repellent or lubricant. Using these chemicals can cause discoloration or cracks.

PTA508

Active 3D glasses PTA508

40	3D / Your 3D glasses