Pairing
This remote control uses radio frequency (RF) to send its commands to the TV. Opposite to remote controls using infrared signals, with this remote control you can send commands without pointing at the TV.
With no need to point the remote control, using the keyboard on the back or sending commands from another room - changing the volume or switching channels - is easy. Additionally, the TV can notify you when the battery power of the remote control is low.
Pairing the remote control
For the remote control to communicate with the TV, both TV and remote control should be paired with each other. Once paired, you cannot use the remote control to control another TV.
When you started the initial TV installation, the TV invited you to press the OK key, and by doing so, the pairing was done. When you switch off the TV, the pairing is stored. You can pair up to 5 remote controls with this TV.
Repairing
You can pair another remote control with this TV.
The method to repair a remote control is different for a remote control already paired with another TV or for a remote control that is not paired yet.
• The remote control is paired with another TV
To pair, hold the Remote control close to the Philips logo (about 10cm) and press the *Red and *Blue key at the same time. A message will appear if pairing is successful.
• The remote control is not paired yet
To pair, hold the Remote control close to the Philips logo (about 10cm) and press OK. A message will appear if pairing is successful.
For retail
To pair a new - not yet paired - TV with a remote control which is already paired with another TV, hold the Remote control close to the Philips logo (about 10cm) and press the
*Red and *Blue key at the same time. A message will appear if pairing is successful.
Batteries
The TV will notify you when the battery power of the remote control is low.
To replace the batteries, open the battery compartment at the back of the remote control.
1 - Use a toothpick or other small, blunt object and press the small, square shaped release button to open the lid.
2 - Replace the old batteries with 3 type
3 - Reposition the battery cover and press it until it clicks.
Remove the batteries if you are not using the remote control for a long time.
Dispose of batteries according to the end of use directives. In Help, press *List and look up End of use for more information.
Cleaning
Your remote control is treated with a
To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV or remote control.
3.3
Watch TV
Channels
Switch channels
To watch TV channels, press tTV. The TV tunes to the TV channel you last watched.
Alternatively, press hto open the Home menu and select Watch TV and press OK.
Switch channels
To switch channels, press CH+ or
To switch back to the previously tuned channel, press b.
To switch to a channel from a channel list
While watching a TV channel, press L LIST to open the channel lists.
Select a list in the row of tabs.
TV / Watch TV | 23 |