Philips 42PFL9742D/19 Sound, Hdmi connections, USB connection, If your problem is not solved

Page 45

2661.1 eng 03-07-2007 11:57 Pagina 45

The picture position on screen is not correct

Some picture signals from some devices do not fit the screen correctly. You can shift the picture with the navigation key on the remote control. Check the signal output of the device.

Sound

There is a picture but no sound

Verify the volume is not set to 0.

Verify the sound has not been muted with the ¬ key.

Verify if all cables are connected properly.

If no sound signal is detected, the TV automatically switches off the sound.

This is proper operation and does not indicate malfunction.

The sound is poor

Verify if the sound is set to Stereo.

Verify the Equalizer settings.

Select any of the Reset to standards settings in the Reset to standard menu. See section 5.3.2.

The sound comes from one speaker only

Verify if the Balance is not set to extreme left or right.

HDMI connections

Trouble with devices connected with HDMI

The HDMI - HDCP procedure might take a few seconds before the TV shows the picture from a device.

If the TV does not recognise the device and the screen shows no picture, try switching from one device to another and back again to restart the HDCP procedure.

If sound interruptions occur persistently, see the user manual of the device to verify the output settings. If that does not help, connect an additional audio cable.

If an HDMI-to-DVI adaptor is used, verify if an additional audio connection is in place to complete the DVI connection.

USB connection

The TV does not show the USB device content

Set your device (camera) to ‘Mass Storage Class’ compliant.

The USB device may need specific driver software. Unfortunately this software can not be

downloaded to your TV.

I can not see my files in the Multimedia menu.

Not all audio and picture files are supported. See section 8 Technical data.

Audio and picture files do not playback smoothly

The transfer performance of the USB device limits the transfer rate.

Personal computer

The PC display on my TV is not stable or is not synchronised

Verify if the correct resolution mode is selected on your PC. See section 8 Technical data.

If your problem is not solved

Switch your TV off and on again. If the problem is not solved, call the Customer Support Centre or consult our website www.philips.com/support.

See the Customer Support Centre telephone numbers on the last page of this user manual.

Please, have the TV Model and Product Number ready before you call.

You can find these numbers on the packaging label or on the typelabel on the back and bottom of the TV.

)Warning

Never try to repair the TV yourself.

ENGLISH

Technical data

45

Image 45
Contents Table of contents Warranty Recycling SafetyCare of the screen EEC 2002/96/ECBack connectors Side connectorsYour TV Television overviewGetting started Product highlightsPosition the TV Wall mounting Vesa First time installation Remote control batteries Connect the mains cordAntenna cable RNoteLearn how to operate your TV for daily use Switch on or off StandbyTo switch off Press B Power at the side of the TV Use your TVWatch TV Watch channels from a digital receiverWatch connected devices Select a Teletext Watch a DVD‡ Insert a DVD disc in your player. Press Play π Press OK † Press Play πTo fully enjoy Ambilight, switch off or dim the room lights Change Ambilight modeUse more of your TV Remote control overviewUse more of your TV Set to operate a particular STB TV menu overviewDevice functions overview MenuUse of the menu Quick access menu Picture and Sound settingsSettings assistant Reset to standardsPicture settings Sound settings ‡ Press q to switch on the Picture format menuThis section describes how to adjust all sound settings Press navigation key up or down to select a settingAmbilight This section describes how to adjust Ambilight settingsTV standby with Ambilight TeletextSelect pagenumber subpages Dual screen teletextEnlarge teletext pages Search teletextTeletext Teletext menuSelect a favourite list Create favourite channel listsSelect a channel from a favourite list ‡ Press OK Last selected list appearsElectronic Programme Guide EPG Switch on EPG‘Now and Next’ EPG ‘7 or 8 day’ EPGTo switch off the On timer, select Off in the On timer menu Timers and locksSubtitles Subtitling from analogue TV channelsActivate or deactivate subtitling Insert a memory card or USB device View and play photos, MP3Remove the USB device or memory card View your picturesMusic settings Slideshow settingsThumbnails Listen to musicUpdate assistant Software updateUpdate assistant helps you to update the TV’s software Listen to radio channelsPress B on the remote control Transfer of the downloaded software update to the TVPower switch B on the TV Software download from the PC to the USB deviceSoftware update by digital broadcast DVB-T Automatic installation Channel installationRearrange stored channels Analogue Manual installationUninstall or reinstall a channel Factory settingsAutomatic Channel management Digital reception testSecond scart connector Back connectors15 USB USB connector Card reader ConnectionsYPbPr can handle HD TV signals Component Video About connectingDisplay synchronised audio out Red, WhiteDVD player Connect your devicesDVD Recorder and DVD Home Theatre System DVD Recorder and Home Theatre SystemSatellite receiver Use a scart cable and 2 antenna cablesUse a Hdmi cable and 2 antenna cables HD Digital receiver / HD satellite receiverDVD-R, Home Theatre System and Digital receiver Blu-ray Disc player Use a Hdmi cableGame console For supported PC monitor resolutions, see Technical dataCamcorder Personal ComputerDigital Audio In if present Connections setupAudio In L/R Naming your devicesPreparing for digital services Insert a Conditional Access ModuleCommon interface menu BBE Technical dataTelevision and remote control TroubleshootingTV channels PictureSound If your problem is not solvedHdmi connections USB connectionIndex Shift OK key Switch on On timer Table of Pages T.O.P Movie expand Software update Mpeg artefact reduction SoundConnector Radio channel Device Reset to standards KeyEng 03-07-2007 1157 Pagina