Philips 20PF5120 TV Displays Wrong Channel or No Channels Above, Repeat channel selection

Page 31

TROUBLE SHOOTING TIPS

No Power

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.

•Check that the outlet is not on a wall switch.

•Be sure the fuse is not blown on the AC power strip, if one is being used.

No Picture

•Check antenna/cable connections. Are they properly secured to the TV’s ANT75Ω plug?

•Check the TUNER MODE control for the correct tuner setting.

•Try running the Auto Program feature to find all available channels.

•Press the AV button on the remote to make sure the correct signal source is selected.

•If using an accessory device, be sure that it is functioning properly.

•If in PC Mode, a video signal MUST BE present or the TV will turn off.

No Sound

•Check the VOLUME buttons.

•Check the MUTE button on the remote control.

•If you’re attempting to hook up auxiliary equipment, check the audio jack connections.

No AV Signal

•Check whether AV and S-Video sockets connected simultaneously. If they are, disconnect the S-Video socket. AV signal automatically overrides the S-Video signal if both sockets are connected simultaneously.

31

S-VHS Color Becomes Faint

•Unplug socket for S-Video connection. Reconnect the S-Video socket of the TV carefully to the VCR socket.

TV Only Produces MONO Sound

•If using a cable box with RF only type connections, the signal coming from the cable box will be produced in MONO only.

•Check Sound control setting. Change setting to Stereo.

Remote Does Not Work

•Check the batteries. Place lithium cell in the remote. Be sure the (+) and (-) ends of the batteries line up as marked inside the battery compartment.

•Clean the remote control and the remote control sensor window on the TV.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.

•Be sure the fuse is not blown on the AC power strip, if one is being used.

•Check to be sure the TV outlet is not on a wall switch.

•Be sure that the remote is in the correct operating mode.

•Be sure the remote is pointed at the Remote Sensor Window on the TV. See page 3 of the Quick Use Guide for details.

TV Displays Wrong Channel or No Channels Above 13

•Repeat channel selection.

•Add the desired channel numbers (using the CHANNEL EDIT control) into the TV’s memory.

•Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 3138 155 LCD TV User`s ManualFor Customer Use Dear Philips product ownerImportant Safety Instructions Additional Safety Precautions Introduction InstallationFeatures Menu PC ModePress the Menu button on Press the Cursor Down button to highlight the Install menuPress the Cursor Right button to Highlight Right to confirm Install menuPressing the CH + or CH button LCD TV’s memory Following steps With the correct and safe way of unfolding the base Smart tips Vesa Complied MountingReattach the battery compartment lid Marked inside the battery CR2025Compartment Press to turn the LCD TV on or off Press to adjust the channel up or downTo TV sound. Select from Incredible Surround Or OFF Press to increase or decrease the sound levelSleep OFF Sleep 15 MIN Sleep 240 MIN TV Picture Menu Controls TV Sound Menu Controls Select either Personal, Rich, Natural, Soft Press the Auto Picture button on the remoteOn the screen Press the Auto Picture button repeatedly toMovie Ratings Onscreen menu Press the Menu button to seePress the Menu button to see the onscreen menu Features menu, then press Cursor Right to enterTbased on the Movie Industry ratings Press Menu repeatedly to remove the menu from the screen Options can be on blocked or OFF unblockedNormal 43, Expand 43, or Compress 169, or aspect ratios Be shown with ADD ? to the right Press the Surf button on the remote controlList Onscreen display may read, Surf ListTo enter Press the Menu button to see the onscreenPicture To adjust other items repeat steps 3To adjust other items repeat steps 4 Press the Cursor Right button to enter the PIP menu 20PF5120 20 LCD TV 15PF5120 15 LCD TVRepeat channel selection TV Displays Wrong Channel or No Channels AboveTV Location CleaningAllow a free flow of air around the TV Warranty Welcome Regulatory Coverage
Related manuals
Manual 3 pages 22.27 Kb
Top Page Image Contents