Philips 20FT3310/37 user manual Care of the screen, Environmental

Page 2

Care of the screen

Do not touch the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.

Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible. Their long time contact with the screen causes deformations and color fading.

Warning concerning stationary images on the TV screen (Plasma displays)

A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a permanent after-image to remain on the screen. This is called phosphor burn in. Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen.

Warning concerning VGA/DVI display mode

As this product processes in VGA/DVI mode, some diagonal lines may be seen under circumstances of environmental interference. This will not affect the computer signal performance that displays in VGA/DVI mode.

Environmental

Your television contains material that can be recycled and reused by specialized companies. Please find out about local regulations on the disposal of your old television set. Pay particular attention to the disposal of exhausted batteries used in your TV Remote Control unit.

Your television consumes energy in the stand -by mode. Energy consumption contributes to air and water pollution. We advise you to switch off your television overnight instead of leaving it in stand -by mode.

Wall mounting instructions/Table stand

According to the type of TV you’ve purchased a wall mount bracket and/or stand may be supplied. To mount the supplied stand and/or wall mount bracket, refer to separate instructions. Make sure that the wall mount is fixed securely so that it meets safety standards.

Make sure that air can circulate freely through the ventilation slots

To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment should not be exposed to any dripping or splashing moisture, and no objects filled with liquids, such as vases, should be placed on it. Insert the aerial plug firmly into the aerial socket at the bottom of the TV.

Connecting the Mains

Insert the mains plug into the wall socket and switch on. Please refer to the label on the back of the television for the correct operating voltage.

Installing the remote control

• Remove the cover at the back of the remote control.

Insert the correct type and size batteries into the battery compartment, making sure they are the right way around.

- 2 -

Image 2
Contents Business Display Solutions Care of the screen EnvironmentalSwitch the TV on Page Welcome Message Line Clear Available on certain models only Page Subtitle Zoom Using the different formatsZoom Super WidePage Connectors on the 20 LCD TV LCD TVsLCD TVs Annex a Health Care Pendant / Pillow Speaker Operation Annex B Connection Information for Healthcare Pendant Annex C Communication Menu of the LCD TV