In this sub menu, the Control settings of the TV can be configured.
∙ ESP: Energy Saving Programmability Mode (ESP) controls the maximum continuous viewing time allowed by the control system. The ESP Menu function is shown as "ESP", and its valid values are 00 - 99 (in hours). 00 value means OFF.
∙ Audio/Video Mute: The Audio/Video Mute menu function determines whether the video should be blanked and the audio muted, if the currently tuned channel has no signal.
∙ Source Menu Item: Toggle between “YES/NO” to enable or disable selection of the TV Source Input via the guest Setup menu when using the guest Remote Control.
∙Channel Guide: Select “YES” to allow the Channel Guide Menu to be displayed if the “Channel Guide” button is pressed on the guest Remote Control. Select “NO” to disable this feature.
∙Min Volume: This item sets the limit for minimum volume allowed for the television set. Use the Right/Left cursor buttons to adjust.
∙Max Volume: This item sets the limit for the maximum volume allowed for the television set. Use the Right/Left cursor buttons to adjust.
∙Audio Out Volume: Set the volume of the external audio output (e.g. bathroom speaker). This volume is
independent of the main speaker volume level. (*Note: Available on certain models only).
In this sub menu, the Close Caption and V - Chip settings of the TV can be configured.
∙ Save CC: This menu item sets the option of saving the Close Caption selection to “Yes” or “No”.
∙ CC: This menu item allow s selection of Close Caption channels, or to turn Close Caption “OFF”.
∙ Saved V
∙
∙
- 7 -