HOW TO USE THE SURF CONTROL
Alist or series of previously viewed chan- nels can be selected with the SURF button
on your remote control. With this feature, you can easily switch between different TV chan- nels that currently interest you. The SURF control allows you to set up to ten channels in its quick viewing list.
1Press the CHANNEL(+) or
2Press the SURF button on the remote control. The onscreen display may read, “SURF LIST EMPTY.” The num- ber of the current channel will be shown with “ADD?” to the right.
3While the SURF list message or the SURF channel list appears on the screen, press the CURSOR RIGHT button to add the present channel to the SURF list.
4If you want to delete the present channel from the SURF list, press the CURSOR RIGHT button again.
Repeat steps 1 through 3 to add more chan- nels (up to 10) to the SURF list.
HELPFUL HINT
Along with regularly programmed chan- nels, the external video source connections can be added to the SURF list. This means that the external A/V Jacks and their chan- nels can be added to your SURF list. Use the Source button to tune their channel and use the same procedure described on this page.
SURF
5 ADD?
3
4
2
1 3 
35
SURF
5 DELETE
SURF
5
3 ADD?
SURF
5
3 DELETE