DC IN
Connect the AC power adaptor between
•the DC IN socket on the back panel, and
•the power supply. »»
blinks.
Install the remote control battery
a c
b
1 Open the battery compartment.
2 Insert one AAA battery with correct polarity
3 Close the battery compartment.
4 Get started
Caution
•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Turn on
Press 
.
»»This product switches to the last selected source.
Switch modes
Automatically switch the modes:
•After this product stays inactive for 15 minutes, it automatically switches to the normal standby mode.
»»The clock is displayed.
»»If the clock is not set, | blinks. |
•After this product stays in the normal standby mode for 15 minutes, it automatically switches to the eco power standby mode.
»»
scrolls, and then the LCD screen lights off.
»»The LED indicator beside the LCD screen lights in red.
Manually switch the modes:
•Press and hold 
to switch this product
•from the working mode or normal standby mode to the eco power standby mode, or
•from the eco power standby mode to the normal standby mode.
EN 7