Installing Flue Components

1.Attaching the First Flue Component to the Starting Collars: A. On the REAR of the heater

To attach the first flue component to the starting collars on the rear of the heater make sure that the heater gasket supplied with the heater seals between the first flue component and the outer heater wrap.

The first 90° elbow installed in the flue system of a rear flueing heater MUST BE in a vertical position.

B. On the TOP of the heater

To attach the first flue component to the starting collars on the top of the heater:

• Slide the male end of the inner flue of the pipe section into the inner collar on the heater. At the same time,

insert the outer flue into the outer collar on the heater. Push the flue section into the appliance collar until all the lances (see Figure 16) have snapped in place. Tug slightly on the flue to con- firm that it has completely locked into place.

• Slide the ceramic fiber pad

 

over the first flue section and

 

place it flush to the fire-

 

place. Continue to add vent

FIGURE 16.

components.

 

WARNING: ENSURE THAT THE HEATER GASKET SUPPLIED WITH THE HEATER SEALS BETWEEN THE FIRST FLUE COMPONENT AND THE OUTER HEATER WRAP.

C. Continue Adding Flue Components

To continue adding flue components in accordance with the pre-planned flue system configuration:

Ensure that each succeeding flue component is securely fitted and locked into the preceding component in the flue system. NOTE: Make sure that seams are NOT aligned to prevent unintentional disconnection.

For elbows that are changing the flue direction, two screws minimum should be put in the outer flue at the joint to prevent the elbow from rotating.

2. Install Support Brackets

For Horizontal Runs - The flue system must be supported every five (5) feet (152.4 cm) of horizontal run by a horizontal pipe support.

To install support brackets for horizontal runs:

• Place the pipe supports around the flue pipe.

21

Page 21
Image 21
Hearth and Home Technologies 6000TRS-CE manual Install Support Brackets, On the TOP of the heater

6000TRS-CE specifications

Hearth and Home Technologies is renowned for producing innovative and efficient heating solutions, and their 6000TRS-CE model exemplifies this commitment to quality and performance. The 6000TRS-CE is a contemporary gas fireplace that combines aesthetic appeal with cutting-edge technology, making it a popular choice for modern homes.

One of the standout features of the 6000TRS-CE is its expansive viewing area. The large glass front allows for maximum visibility of the flames, creating a captivating focal point in any room. This model is designed with a clean, modern aesthetic, ensuring that it seamlessly fits into various interior designs.

In terms of efficiency, the 6000TRS-CE is equipped with a powerful heat exchanger that ensures optimal warmth while minimizing energy consumption. This not only makes it environmentally friendly but also results in lower utility bills for homeowners. The fireplace boasts a high efficiency rating, which underscores its prowess in providing comfortable heating without excessive fuel usage.

The technology integrated into the 6000TRS-CE allows for precise temperature control. With an advanced electronic control system, users can easily adjust settings to their desired levels, making it convenient to maintain the perfect ambiance. The model also features a remote control option, allowing homeowners to operate the fireplace from the comfort of their seating area.

Additionally, the 6000TRS-CE incorporates a realistic flame presentation, achieved through its innovative burner system. This system not only enhances the visual appeal of the flames but also contributes to a more realistic ambiance, emulating the look and feel of a traditional wood-burning fireplace without the hassle of logs and ashes.

The 6000TRS-CE is designed with safety and convenience in mind. It includes a glass enclosure that remains cool to the touch, offering peace of mind for households with children or pets. Furthermore, the fireplace is equipped with safety shut-offs and feature-rich options that enhance user experience while prioritizing safety.

Overall, the Hearth and Home Technologies 6000TRS-CE model combines modern design with efficient performance, ensuring it stands out in the realm of gas fireplaces. With its impressive features, ease of use, and focus on safety, the 6000TRS-CE is an excellent addition to any home looking to enhance its heating solution while maintaining a stylish appearance.