Freestanding Ranges:

1.Measure the distance of the countertop to the floor.

2.Then measure from the top of the range cooktop trim to the floor.

A

A. Distance from the top of the range cooktop trim to the floor

3.Your leveling height will be the difference between the 2 measurements you have just taken.

Adjust Leveling Legs

1.If range height adjustment is necessary, use a wrench or pliers to loosen the 4 leveling legs.

This may be done with the range on its back or with the range supported on 2 legs after the range has been placed back to a standing position.

NOTE: To place range back up into a standing position, put a sheet of cardboard or hardboard in front of range. Using 2 or more people, stand range back up onto the cardboard or hardboard.

2.Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of ³⁄₁₆" (5 mm) is needed to engage the anti-tip bracket.

NOTE: If height adjustment is made when range is standing, tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs.

3.When the range is at the correct height, check that there is adequate clearance under the range for the anti-tip bracket. Before sliding range into its final location, check that the anti- tip bracket will slide under the range and onto the rear leveling leg prior to anti-tip bracket installation.

Install Anti-Tip Bracket

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation instructions.

Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

1.Remove the anti-tip bracket from where it is taped inside the storage drawer or warming drawer.

2.Determine which mounting method to use: floor or wall.

If you have a stone or masonry floor, you can use the wall mounting method. If you are installing the range in a mobile home, you must secure the range to the floor.

3.Determine and mark the centerline of the cutout space. The mounting can be installed on either the left side or right side of the cutout. Position the mounting bracket against the wall in the cutout so that the V-notch in the bracket is

13¹³⁄₆₄" (33.62 cm) from the centerline as shown.

B

Centerline

A

A. 13¹³⁄₆₄" (33.62 cm) B. Bracket V-notch

9

Page 9
Image 9
KitchenAid W10440551A installation instructions Adjust Leveling Legs, Install Anti-Tip Bracket, Freestanding Ranges

W10440551A specifications

The KitchenAid W10440551A is a notable kitchen accessory that has garnered attention for its quality and functionality. Designed with a perfect blend of style and performance, this product features a robust construction that ensures durability and longevity, making it an ideal companion for any home chef.

One of the standout features of the KitchenAid W10440551A is its versatility. It is not merely a single-use appliance but a multi-functional tool that can assist with a variety of cooking tasks. Whether you’re mixing, kneading, or whipping, this product can handle it all, making it an essential addition to any kitchen. The user-friendly design allows for effortless operation, even for those who are new to cooking.

In terms of technology, the W10440551A incorporates advanced mechanisms that enhance user experience. The powerful motor is designed to provide consistent performance, ensuring that you achieve the desired results every time. Additionally, the product features several speed settings, allowing you to adjust the mixing intensity according to your specific needs. This level of customization makes it suitable for a range of recipes, from delicate meringues to heavy bread doughs.

Another impressive aspect of the KitchenAid W10440551A is its ergonomic design. The appliance is crafted for comfort and ease of use, with controls that are both intuitive and accessible. A well-placed handle ensures that pouring and transferring mixtures is a straightforward task, reducing the likelihood of spills and messes.

The product also includes various attachments that enhance its functionality further. From dough hooks to whisk attachments, these accessories allow users to expand their culinary capabilities without the need for additional appliances cluttering the kitchen counter.

Moreover, the KitchenAid W10440551A is designed with safety in mind. It features a secure locking mechanism that keeps the bowl in place during operation, preventing any accidental spills or accidents.

Finally, the aesthetic appeal of the KitchenAid W10440551A cannot be overlooked. Available in multiple colors, this appliance can seamlessly blend into any kitchen décor, adding a stylish touch to your culinary space.

In summary, the KitchenAid W10440551A stands out for its versatility, user-centric design, and robust performance, making it an indispensable tool for modern kitchens. Whether you are a novice cook or a seasoned chef, this appliance is sure to elevate your cooking experience.