Philips 19MD350B/F7 user manual Information,  Glossary,  Maintenance, Atsc, Ntsc

Page 54

INFORMATION

Glossary

ATSC

Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.

Aspect Ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).

Component video

This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio.

HDMI

(High-Definition Multimedia Interface)

Interface that supports all uncompressed, digital audio/video formats including set-top box, BD/DVD recorder or digital television, over a single cable.

HDTV (High Definition TV)

Ultimate digital format that produces high resolution and high picture quality.

NTSC

Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards. Off the air NTSC signals will no longer be sent by broadcasting stations during 2009.

Password / PIN Code

A stored 4-digit number that allows access to parental control features.

Region Code

Regions associate discs and players with particular areas of the world.

This unit will only play back discs that have compatible region codes.

You can find the region code of your unit by looking on the rear panel.

Some discs are compatible with more than one region (or all regions).

SAP (Secondary Audio Program)

Second-audio channel delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.

SDTV (Standard Definition TV)

Standard digital format that is similar to the NTSC picture quality.

S-Video

Offers higher quality images by delivering each signal, color (c) and luminance (y) independently of each other through a separate cable.

Maintenance

Cabinet Cleaning

•Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the AC power cord.

Disc Handling

Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

•To clean-off, use a soft cloth.

•Do not use a hard cloth since this will mar the disc.

•Wipe the disc in a straight line form center to edge.

•Never wipe with a circular motion.

Servicing

Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the AC power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.

If the Laser Optical Pickup Unit is Dirty

If the unit still does not perform properly when it is operated, while referring to the relevant sections and to "Troubleshooting Guide" in this user manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

IR Signal Check

If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.

• With a digital camera

(including built-in cell phone cameras): Point the Digital Camera towards the remote control infrared diode at the front of the remote control. Press any button on the remote control and look through the camera display. If the infrared pulsating light appears through the camera, the remote control is sending out an IR signal.

• Do not use detergent or abrasive cleaning agents.

54

EN

Page 53 Page 55
Image 54
Page 53 Page 55
Contents 19MD350B Notification For Customer UseImportant Safety Instructions Read before operating equipmentIntroduction  PrecautionLaser Safety Important Copyright InformationTo Avoid the Hazards of Electrical Shock and Fire  Symbols Used in this Manual Trademark Information Location and HandlingTilt Stand  Supplied Accessories Attaching the Stand To remove the stand from this unit Features DTV/TV/CATV Contents TV FunctionsDVD Functions  Control Panel  TerminalsAnalog mode TV  Remote Control FunctionDigital mode DTV DVD mode Installing the Batteries Battery Precautions Connection to Cable Receiver or Satellite Box Preparation Antenna Connection Satellite provider External Device Connection Hdmi ConnectionHDMI-DVI Connection Component video Connection Video ConnectionAudio Output Connection for digital broadcasting only  Plug In the AC Power Cord ResolutionPC Connection Before you begin TV Functions  Initial SetupAfter an initial setup is completed Make sure the unit is connected to antenna or cableWatching TV  Volume Adjustment Sleep Timer  Channel Selection Still Mode  Switching Each Input ModeSwitching Audio Mode Press Info  TV Screen InformationBroadcasting information Selected program TV Screen Display Mode For 169 video signalFor PC input signal Optional Setting  Main Menu Autoprogram Press Menu to exit  Channel ListUse Cursor K/L to select Channel List, then press Channel you want to add, then press OK Antenna Confirmation  Language SelectionUse Cursor K/L to select Antenna, then press OK Use Cursor K/L to select the desired setting, then press OK  Picture AdjustmentAdjust the picture quality Smart PictureSmart Sound  Sound AdjustmentTV Speakers EqualizerCaption Service Caption mode Closed Caption Digital Caption Service To select Digital Caption ServiceUse Cursor K/L to select On, then press OK Font Color Font StyleFont Size Font OpacityChannel Lock  Child LockUse Cursor K/L to select Child Lock, then press Change PINAssociation of America Channel LockUS Movie ratings lock Press Menu to exitUS TV ratings lock To set the sub ratingsUse Cursor K/L to select US TV ratings lock, then press OK Change PIN Use Cursor K/L to select Change PIN, then pressClock, Phase  PC SettingsAuto Adjustment Horizontal Position, Vertical PositionUse Cursor K/L to select Energy Saving Mode, then press OK  Energy Saving ModeLocation Use Cursor K/L to select the desired mode, then press OK Current Software Info Confirm the version of the software currently usedOperating DVD DVD Functions Playable Media Unplayable Media  Resume Playback  Playback Disc Menu DVD Fast Forward / Fast Reverse  Slow Forward / Slow Reverse Zoom Chapter / Title / Track Search During playback, press Mode repeatedly until / appears Search Functions You can select chapters, titles or tracks on the discTime Search Direct Search Repeat Playback Repeat A-B Playback Programmed Playback  Random PlaybackYou can repeat playback between a and B on a disc  Special Settings  On-screen DisplaySubtitle Language Camera Angles Black Level SettingPress Cursor K/ L to adjust the black level Audio LanguageAppears Stereo Sound ModeVirtual Surround Press Cursor K/ L to select the sound levelSubtitle *1, *2Default OFF DVD Setting DVD Language Setting Audio *1, *2 DVD Audio Setting Down SamplingNumber buttons to enter the current 4-digit password  Parental SettingIf you have set password already, use Use the Number buttons to enter the new 4-digit password Others You can change the other functions Reset to the Default Setting  Language Code List LanguageTroubleshooting There is no clock function on this unitTroubleshooting  Troubleshooting GuideTape containing captions Have been read during copying During playback Angle does not switchCaptions are displayed as a Make sure the disc is compatible with the unit Glossary  MaintenanceInformation AtscCatv LCDLimited Warranty Ninety 90 DAY Labor / ONE 1 Year Parts Français
Top Page Image Contents