Philips 6 manual HOW to USE the DNR Noise Reduction Control

HOW TO USE THE DNR (NOISE REDUCTION) CONTROL

or reasons such as poor cable
Freception, the picture can sometime
appear slightly “speckled” (or signal
noise shown in the picture). The DNR
(Dynamic Noise Reduction) control can
help eliminate this type of interference		Menu
and improve the quality of the picture.
		Picture	Brightness
		Sound	Color
Press the MENU button on the		Features	Picture		Picture
		Install	Sharpness
					Brightness	50
remote to display the on-screen menu.
			Tint		Color
			More...
Press the CURSOR UP	or				Picture
					Sharpness
CURSOR DOWN ■ button until the					Tint
word PICTURE is highlighted.					Color Temp.
Press the CURSOR RIGHT
button to display the PICTURE menu
features.
Press the CURSOR UP	or				Picture
			4		Color
CURSOR DOWN ■ button to scroll					Picture
the Picture menu features until the word		1	2	6	Sharpness
DNR is highlighted.					Tint
					Color Temp.
Press the CURSOR RIGHT					DNR	On
button turn the DNR feature ON or
OFF.				3 5
When finished, press the STATUS					Picture
/EXIT button to remove the menu		2
from the TV’s screen.					Color
		4			Picture
					Sharpness
					Tint
					Color Temp.
					DNR	On
SMART HELP
“Noise” Reduction is a video						OR
adjustment feature that affects the
picture quality of the TV not the sound.
NOTE: If the Sharpness control setting					Picture
is under 50 (see Picture Adjustments on					Color
the previous page), the DNR control will					Picture
					Sharpness
have little or no effect to the TV’s pic-
					Tint
ture when switched to ON.
					Color Temp.
					DNR	Off
			6