Philips 62PL9774, 55PL9774 setup guide Setting the Clock-Auto Clock Mode, Auto Clock Channel

After following steps 1-4 above, press the Cursor Down button to select Auto Clock Channel.

Press the Cursor Right button to enter the channel list. Select your local PBS channel by using the Cursor Up or Down buttons to scroll through the channel list or inputing the the channel using the number buttons.

Press the Menu button on the remote control to remove the on-screen menu from the TV screen.

Press the Cursor Down button to select Auto Clock Mode. Then Press Cursor Right Button to Select “Automatic” or “Manual.” Select Automatic to have the TV acquire the time from a the TV signal. Choose “Manual” to set the time yourself.

Press the Menu button on the remote control to display the on-screen menu.

G

Setting the Clock—Auto Clock Mode

There are several features which require the TV clock to be set. You can either set the clock manually or have the TV acquire the time from the appropriate TV channel.

1

2 Press the Cursor Down button to high- light “Settings.”

3 Press the Cursor Right button repeated- ly to select the “Clock” menu.

TV

Settings

Demo

Install

Picture Sound Features Channels

TV

General Clock Source

Settings

Demo

Install

Clock

Settings

4

If you choose to set the time Automatically you will need to set the “AutoClock Channel” by continuing with steps 5-8 below. If you select manual you will need to make the cor- rect settings by continuing on page 67.

Auto Clock Channel

5

6

7

8 Next Set the Time Zone and Daylight Savings Time. See page 68 for instruc- tions.

	INFO	SELECT	PIXEL PLUS	3
6	CC	SURR	HD	4
			SCREEN
			FORMAT	6

2	MUTE	1
4		7
5
		6
6 AV+
	ACTIVE
SAP	CONTROL CLOCK

Auto clock mode

Auto clock channel

Time

Day

Time zone

Daylight saving

Settings	Clock	Automatic Manual
Auto clock mode
Auto clock channel
	Time
	Day
Time zone
Daylight saving
Settings	Clock
			---
Auto clock mode			34
Auto clock channel			35
	Time		36
	Day		37
Time zone			38
Daylight saving			---

HELPFUL HINT

When the clock is set to “automatic” there will be a several second delay when the TV is turned on and off. During this delay the blue LED will blink. This is normal.

64